Hello everyone,
I want to configure traffic shaping (or bandwidth) on ASR 1006 but somehow it is not working. Interesting ACL is not catch the traffic? You can see the configuration at the below.
MY PC(10.200.0.217) ------> FW (with NAT - 194.X.X.X) -------> ASR 1006 (with Traffic Shaping)
!
ip access-list extended POLICY_ACL
permit ip host 194.X.X.X any (THIS IP ADD is my PUBLIC IP)
permit ip host 10.200.0.217 any (THIS IP ADD is my local PC)
!
class-map match-any POLICY
match access-group name POLICY_ACL
!
policy-map POLICY
class POLICY
shape average 1000000
!
interface GigabitEthernet0/0/4
description OUTSIDE_Interface
ip address x.x.x.x 255.255.255.252
ip nbar protocol-discovery
negotiation auto
crypto map clientmap
service-policy output POLICY
!
Thank you very much,
My best.
Cavit Davutoglu