cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
632
Views
5
Helpful
2
Replies

[ASR9001] Consume power only one side

Hi,

One of my ASR9001 consumes power only one side. While another load share normally. How should I do?

 

1.jpg

 

Thank you very much.

1 Accepted Solution

Accepted Solutions

 

Power from the PDU normally, but the PSU does not supply to the router. I solved it by reseated the PSU.

Thank you very much.

View solution in original post

2 Replies 2

marce1000
VIP
VIP

 

 - FYI : https://www.cisco.com/c/en/us/td/docs/iosxr/asr9000/hardware-install/9001-hig/b-asr9001-hardware-installation-guide/b-asr9001-hardware-installation-guide_chapter_0111.html#con_1015376

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

 

Power from the PDU normally, but the PSU does not supply to the router. I solved it by reseated the PSU.

Thank you very much.

Review Cisco Networking for a $25 gift card