Routing

Hi,I need help.This is possible?192.168.10.2 only can ping gateway.why 192.168.20.2 192.168.30.2 and 192.168.40.2 dont ping gateways? config switch 2960PT:!version 12.2no service timestamps log datetime msecno service timestamps debug datetime msecno...

Good morning all,I have a nice easy one for somone out there i'm sure......I have been asked to bridge and existing LAN to another site office at the other end of the country:LAN <> WAN <LAN>Currently the existing LAN has no external connectivity and...

Hi all, Need some advice pleaseWe have our office connected to our dc via two independent metro Ethernet links. 100mb &amp;10 mb respectively.  The links are provided by BT and VMB, both presented on rj45's each end.     Site A we have 2 Cisco 2901's...

Hi to All,Two PPP router links /32 subnet and the links see OSPF hello packets form each other.Problem:The client complaints "Rcv pkt from xxx.x.137.65, Dialer2, area 0.0.0.0 : src not on the same network"Theory:as there cannot be more than 1 host on...

Hello Guys,I am working on below topology and I am facing issues of route refresh in ospf routing tableon both ABR's due to which connectivity to Internet is going down and up.I am seeking your help to know the issue and help in troubleshooting the i...

Hi,we've got an 866vae attached to a VDSL 50 MBit line, currently working as router. Getting a new firewall now, so wondering if i can keep it and use it as "dumb" vdsl modem in front of the firewall ?Thanks!Torsten

what is the command so i can view what my pppoe max sessions are?  For some reason we cannot get more than 55.Thank You Kevin                  

On Cisco 29xx routers, I saw serial interface in different naming conventions (depending on the interface card, such as HWIC or VWIC).Some are named s0/0/0.  Some are named s0/0/0:0.Why is the difference?Thanks!

In this configuration example (from a CISCO887VA) will the the outbound traffic be restricted to 228K?                   interface ATM0no ip addressno atm ilmi-keepalivepvc 0/38  vbr-nrt 288 288  encapsulation aal5mux ppp dialer  dialer pool-member 1...

There is my configuration. I have only access with subnetwork 192.168.10.254 in the internet. With others can not ping de gateways example: 192.168.20.254 , 192.168.30.254 and 192.168.40.254.Help me please.Building configuration...Current configurati...