BGP VPNv4 route reflector not reflecting VRF routes

[aprasad11]

Hi Guys,

I have a question regarding VPNv4 route reflector.

I have router R1, R2 and R3. R2 is the vpnv4 route reflector.

I have created a vrf which has same RD, same Export and Import route targets in all 3 routers.

All routers are sending and receiving communities.

R2 who is the route reflector learns all VPNv4 routes from R1 and R3 but R3 does not pass R1 routes to R3

Should the VPNv4 route reflector be reflecting these routes between R1 and R2 ?

[Julio E. Moisa]

Thank you I saw R2 is receiving 1 prefix from each neighbor, you can compare your config with the config below. 

Also you can check the route-targets configured on the VRF, they should be the same. 

[nwekechampion]

Hi  @Julio E. Moisa ,

I beg to differ. why wont RR be used in an MPLS L3vpn environment?