01-10-2023 08:26 AM
Hello guys,
Anyone help, when we could use Power PoE adapter on router C8200 series?
Solved! Go to Solution.
01-10-2023 08:44 AM
From the Data Sheet for the C8200 "PoE ports added in the Network Interface Module (NIM) slot will require an additional external PoE power supply"
So if you install a 4-port or 8-port switch module (such as NIM-ES2-8-P) that provides PoE you need to have the additional power supply (PWR-CC1-150WAC).
Maren
01-10-2023 09:48 AM
The external power supply is for the PoE card only. It does not provide the 12V needed to run the 8200 itself. The internal power supply is designed for that. So, if you have a PoE card you will need both power supplies connected.
01-10-2023 08:44 AM
From the Data Sheet for the C8200 "PoE ports added in the Network Interface Module (NIM) slot will require an additional external PoE power supply"
So if you install a 4-port or 8-port switch module (such as NIM-ES2-8-P) that provides PoE you need to have the additional power supply (PWR-CC1-150WAC).
Maren
01-10-2023 09:19 AM
So, mean do I need to use both AC and PoE adapter simultaneously or just use PoE adapter and remove AC power?
01-10-2023 09:48 AM
The external power supply is for the PoE card only. It does not provide the 12V needed to run the 8200 itself. The internal power supply is designed for that. So, if you have a PoE card you will need both power supplies connected.
01-10-2023 08:52 PM
Got it, thank for your kindly support.
01-08-2024 08:42 PM
I have got a "NIM-ES2-8-P" module connected in 8200 Router,but the POE is not working. I can connect laptop to the module.Is there any specific command from config mode or interface to enable POE
01-09-2024 05:56 AM
And you have the external power supply connected for providing the power for PoE?
Maren
01-09-2024 03:32 PM
@titusroz03 wrote:
I have got a "NIM-ES2-8-P" module connected in 8200 Router,but the POE is not working.
A PoE-enabled 8200 router requires a PoE Daughterboard. IF there is no PoE daughterboard, the NIM-ES2-8-P will not power up even with the PoE power supply enabled.
01-08-2024 08:42 PM
I have got a "NIM-ES2-8-P" module connected in 8200 Router,but the POE is not working. I can connect laptop to the module.Is there any specific command from config mode or interface to enable POE
01-08-2024 11:58 PM
Hello,
the only command I can think of is 'power inline auto' (in interface configuration mode)...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide