Routing

!interface GigabitEthernet0/0/0description ISP-001ip address dhcp hostname ROUTER-001ip flow ingressip flow egressip nat outsideip virtual-reassembly inzone-member security WANduplex fullspeed 1000!interface GigabitEthernet0/1/0description ISP-002ip ...

Hello Community,I'm dealing with a routing problem on a Cisco ASA 5512 and I'm hoping to get some assistance.I've set up a VPN connection between two sites. The local site has the IP address range 192.168.2.0/24, and the remote site has the IP addres...

hi in the firsat router I configured the targeted net end related next hop and it is not working. can I get help. frank

Open ports 8010,8015 and 8020 on a Cisco C1111-4P.Does anyone know how i can shut these open ports down.With NMAP i see that the ports are open from the outside

Hello I have two networks one that has three smartphones connected too two cell towers which receive their ipv4 address via DHCP from the central network. This network is then connected to a second network which has several end point devices connecte...

Please tell me if that configuration is OK to authenticate session over mac-address (client will set static IP) with traffic policy on ASR 1K series:Radius parameteres: Framed-IP-Address := 194.60.210.2 Framed-IP-Netmask := 255.255.255.0 Cisco-AVPair...

Hi all,i started to have some issues with customers in only one vlan running on port-channel 20.50 virtual int. There are almot 5000 customers with static IPS (routers only in our management). I have 1-2 cases per month when customers service not wor...

in the PNG file as u can see I have 3 departmentsonly the computer science dept network can't ping any other network than just the router.no other dept can reach comp, and i want a full connectivity, i have used ospf for routing and IDK what is wrong...

We have been supplied with a set of C1111 routers that did not have the SEC-K9 licensing necessary for our network configuration. We also have no internet facing appliances capable of smart licensing. Reached back to vendor who then supplied the SEC-...

Hello team, I have a question regarding licensing. I'm considering to buy Cisco ISR 1101 series router with IOS-XE. As far as I know, the default license there is IP BASE. My question is, do I need to buy this license separately? I mean does it come ...

HiI have a highly meshed network with ASR9xx routers. The configuration of ISIS (l2 only) includes fast-reroute per-prefix level-2 allfast-reroute remote-lfa level-2 mpls-ldpon most but not all of the routers. Is it possible to have some parts of the...

So I have this test due using packet tracer. Whenever I reopen the file I've saved the Router reverts back to the original IP. I need 192.168.1.3 on the router, and it goes back to 192.168.0.1. Also, when it reverts back it messes with the DHCP of my...