03-18-2024 09:03 AM
I am sure that I missing something simple in my understanding of how this works. I have connected my virtual CML lab to my network through the external connector. I am able to reach the internet from my edge router. However, for some reason I can not ping the gateway from any neighboring routers even though I have advertised the default route into OSPF.
I was experiencing this problem on a larger lab so I created a minimal one here to eliminate variables.
Solved! Go to Solution.
03-19-2024 01:43 AM
Hello
apply the following and test again:
R1
int gig0/1
ip nat outside
int gig0/0
ip nat inside
access-list 1 permit 10.1.5.0 0.0.0.255
ip nat inside source list 1 interface gig0/1
03-18-2024 12:56 PM
you need to NAT traffic in R1 the NAT cloud know only the link between R1 and Cloud not beyond that
MHM
03-19-2024 01:43 AM
Hello
apply the following and test again:
R1
int gig0/1
ip nat outside
int gig0/0
ip nat inside
access-list 1 permit 10.1.5.0 0.0.0.255
ip nat inside source list 1 interface gig0/1
03-19-2024 05:27 AM
Nailed it. I guess I need to read up on NAT. I figured my ISP router was already doing that so I wouldn't have to. Thanks!
03-19-2024 08:17 AM
I will go to sleep sad today, I already mention that in first comment
LOL... just kidding
glad your issue solved
Have a nice day and good lab
MHM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide