Hello,
I have just setup a 2650 hp switch, the IP of the firewall is 10.52.100.123............I can ping fine........if I put a workstation in this vlan (id 100) i can ping firewall and access the internet fine.
Now if I am in a different vlan, say vlan 16 I cannot ping the firewall ip but can ping the vlan default gateway 10.52.100.254, my config is below of the switch:
Startup configuration:
; J4899A Configuration Editor; Created on release #H.10.83
hostname "bmi-2650-core1"
max-vlans 50
time daylight-time-rule Western-Europe
console inactivity-timer 15
interface 49
no lacp
exit
interface 50
no lacp
exit
trunk 49-50 Trk1 LACP
ip routing
timesync sntp
sntp unicast
snmp-server community "public" Unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged 3-46,Trk1
ip address dhcp-bootp
no untagged 1-2,47-48
exit
vlan 100
name "bmi_fwall"
untagged 47-48
ip address 10.52.100.254 255.255.255.0
tagged Trk1
ip igmp
exit
vlan 10
name "bmi_svr"
untagged 2
ip address 10.52.10.254 255.255.255.0
tagged Trk1
ip igmp
exit
vlan 16
name "bmi_wired"
untagged 1
ip address 10.52.16.254 255.255.255.0
ip helper-address 10.52.10.1
ip helper-address 10.52.10.2
tagged Trk1
ip igmp
exit
vlan 20
name "bmi_guestw"
ip address 10.52.20.254 255.255.255.0
ip helper-address 10.52.10.1
ip helper-address 10.52.10.2
tagged Trk1
ip igmp
exit
vlan 25
name "bmi_wless"
ip address 10.52.25.254 255.255.255.0
ip helper-address 10.52.10.1
ip helper-address 10.52.10.2
tagged Trk1
ip igmp
exit
vlan 40
name "bmi_print"
ip address 10.52.40.254 255.255.255.0
ip helper-address 10.52.10.1
ip helper-address 10.52.10.2
tagged Trk1
ip igmp
exit
vlan 90
name "bmi_cctv"
ip address 10.52.90.254 255.255.255.0
ip helper-address 10.52.10.1
ip helper-address 10.52.10.2
tagged Trk1
ip igmp
exit
vlan 5
name "bmi_mgmt"
ip address 10.52.5.254 255.255.255.0
ip helper-address 10.52.10.1
ip helper-address 10.52.10.2
tagged Trk1
ip igmp
exit
vlan 167
name "VLAN167"
exit
ip route 0.0.0.0 0.0.0.0 10.52.100.123
spanning-tree
spanning-tree Trk1 priority 4
spanning-tree priority 0
password manager
password operator
bmi-2650-core1(vlan-100)#
I've added the static-route to the firewall 10.52.0.0, if I telnet to the switch I can ping 10.52.100.123 fine
this is from the firewall (pix 515): when I try and ping 10.52.100.123 from 10.52.16.222 (ip of workstation):
Teardown ICMP connection for faddr 10.52.16.222/1 gaddr 10.52.100.123/0 laddr 10.52.100.123/0 |