cant upgrade IR809

[KimMadsen6918]

hi all. im trying to update my IR809 from  15.8(3)M1 to 159-3.M10. but when i rund the command i get an error. any idea how to free up space for bootstrap?

VV_STB_VB01#bundle install flash:ir800-universalk9-bundle.SPA.159-3.M10.bin rom-autoboot delete
Installing bundle image: /ir800-universalk9-bundle.SPA.159-3.M10.bin...................................................................................................................................................................................

updating Hypervisor image...
Sending file modes: C0644 25173797 ir800-hv.srp.SPA.3.1.36

%Error copy from scp://*:*@127.1.3.1//vds_system/bundle/ir800-hv.srp.SPA.3.1.36 to bootstrap:ir800-hv.srp.SPA.3.1.36

No more space in bootstrap.
Failed to install hypervisor image!

[Flavio Miranda]

@KimMadsen6918 

I believe the solution might be on this link but I never did it before.

https://www.cisco.com/c/en/us/support/docs/cloud-systems-management/iox/212923-low-space-available-for-iox-package-depl.html

[Elliot Dierksen]

I haven't had to update an IR800 in a while, but I do remember that it doesn't need the bundle after the install/upgrade is complete. Is there an old bundle file that can be deleted? The running file does not have the ".bin" extension, at least in the one I have available to view.

System image file is "flash:/ir800-universalk9-mz.SPA.159-3.M8b"

[KimMadsen6918]

hi. the running file is a folder an it creates the folder after the bundle install. thats why it dont have an .bin extension. so no old bundle file i can delete. have done this many time before on an ir800 but i have never heard the error "bootstrap full"