Cat3750 copy run start error

[Cisco Tech]

I have a 3750 stack of 4 switches that was installed about 2 years ago. Recently I was doing some work on the switch and realized that I am unable to save the config. I amobviously concerned that if the power fails or the switch reboots I will be reconfiguring it and that is not something I am interested in doing! Any help would be appreciated.

Here is the error that I am receiving:

switch#copy run startup-config

Destination filename [startup-config]?

Building configuration...

nv_done: unable to open "flash:/config.text.new"

nv_done: unable to open "flash:/private-config.text.new"

nv_done: unable to open "flash:/multiple-fs.new"[OK]

0 bytes copied in 5.730 secs (0 bytes/sec)

~BRAD

[Ivan Shirshin · Accepted solution]

Hi,

I think you made a duplicate post. I have replied to you in other thread:

https://supportforums.cisco.com/message/3675873#3675873

Kind Regards,
Ivan

**Please grade this post if you find it useful.

[Cisco Tech]

Thank you Ivan. I must have accidentally entered it twice!

~BRAD

[Leo Laohoo]

Duplicate posts #3.  

[damori.pierce]

I'm having this same issue but the link you provided is no longer valid... can anyone point me to a new discussion where this is answered?