Catalyst 3560 routing config ?

[FabianAllen]

Hello guys, I've purchased a catalyst 3560 multilayer switch for myself and I'm trying to configure two things:

1. SSH 

2. VLAN

With SSH I'm able to get it up when creating any VLAN other than 1 but for VLAN 1 no matter what I do( assign an IP address, etc) I can never get it to work.

With VLAN, I can configure the VLAN 100 for int ra f0/1-12 and VLAN 200 for int ra f0/13-24 and then DHCP servers for both of them but the Mikrotik router my ISP has can never route anything back to me because the uplink interface is in a different subnet (192.168.91.0/24) and it seems as their Mikrotik have no idea how to route packets back.

In packet tracer, in order for this thing to work, I'd need to set up a static route for a router to know how to send packets back.

Does anyone know how else I can make this work?

Thank you.

Btw I don't have public IP address, my ISP give us out private IP.s and I'm just connecting my switch directly to the uplink that is connected to the mikrotik.

[paul driver]

Hello

Duplicate post with this - yet again this is a new post with the exact same content but used a different user name - not sure why when the other posts are still active?

@shados 
@kumarmh91282 

[shados]

not sure what's going on but my original post is the only one I've posted, this is some weird duplicate. The issue is resolved in the original post fyi.