Cisco 1841 how to set 3389 port forwarding from wan to lan address

[acord2011]

Please help us with the followings:

At one of our client premises they have an Cisco 1841 router. We need to connect from outside (other location in another country) with Remote Desktop connection port 3389 to an internal IP address ( a server).

From any IP address it have to permit a connection on port 3389 to be forwarded to the server.

Thank you for your help.

[johnlloyd_13]

Hi Marius,

Use static NAT as below:

ip nat inside source static tcp LAN/SERVER_IP 3389 WAN_IP 3389

Sent from Cisco Technical Support iPhone App

[haider.rizwan]

Hi John,

Above command works in Cisco 2811 like a charm. thank you

[vgoldenlev]

I was looking for this command as well, haven't tried yet but I will try it if this will work for me.

[vgoldenlev]

thanks, that worked well

[jyoung]

also make sure the traffic is being allowed in the inbound acl on the wan interface if configured or zone based firewall policy.

Sent from Cisco Technical Support iPhone App