11-04-2011 06:33 PM - edited 03-04-2019 02:10 PM
Please help us with the followings:
At one of our client premises they have an Cisco 1841 router. We need to connect from outside (other location in another country) with Remote Desktop connection port 3389 to an internal IP address ( a server).
From any IP address it have to permit a connection on port 3389 to be forwarded to the server.
Thank you for your help.
11-06-2011 03:36 AM
Hi Marius,
Use static NAT as below:
ip nat inside source static tcp LAN/SERVER_IP 3389 WAN_IP 3389
Sent from Cisco Technical Support iPhone App
01-24-2016 10:37 PM
Hi John,
Above command works in Cisco 2811 like a charm. thank you
04-27-2016 02:37 PM
I was looking for this command as well, haven't tried yet but I will try it if this will work for me.
04-28-2016 12:39 PM
thanks, that worked well
11-06-2011 05:45 AM
also make sure the traffic is being allowed in the inbound acl on the wan interface if configured or zone based firewall policy.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide