I have 4 GB installed in 2951 but only 2 GB show up. Am I missing something?
Total memory size = 4096 MB - DIMM0 = 2048 MB, DIMM1 = 2048 MB
CISCO2951/K9 platform with 4194304 Kbytes of main memory
Main memory is configured to 72/72(dimm 0/1) bit mode with ECC enabled
Installed image archive
Cisco CISCO2951/K9 (revision 1.1) with 1835264K/261888K bytes of memory.
3 Gigabit Ethernet interfaces
1 terminal line
1 Virtual Private Network (VPN) Module
DRAM configuration is 72 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
4001760K bytes of ATA CompactFlash 1 (Read/Write)