Cisco 3650 QoS design: "mls QoS" not supported
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-26-2015 04:18 PM - edited 03-05-2019 12:39 AM
Dear colleagues,
I am currently testing a Cisco 3650 for various catalogue items. One key feature that we use on almost all our catalogue items, is Quality of Service (QoS).
On the old Cisco 3560 and 3750, we use "mls qos" and related commands. We use numbered ACLs for untrusted QoS policy that sits on the LAN / ingress port. I have raised a TAC case for this issue but is there a tool to help me convert the "mls QoS" design on the old 3560 platform to the new 3650 platform where "mls qos" is not supported?
Many thanks.
- Labels:
-
Routing Protocols
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-26-2015 04:38 PM
Hi,
The new 3650 runs IOS-XE and the older Cisco 3560 and 3750 run IOS. So the QOS architecture on the new 3650 is different.
here is the link to the qos config for the 3650:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3650/software/release/3se/qos/configuration_guide/b_qos_3se_3650_cg/b_qos_3se_3650_cg_chapter_011.html
HTH
