Cisco ios 12.4 power inline time range

[Yordi Mahieu]

                   Hello i have a ip-cam that is connect with power inline on my cisco router,

i want to scheduler a reboot daily, of this ip-cam is there a posibility to use a daily time (time-range) to shutdown the interface and back up, or shutdown de inline power on this interface and back up ? i have ios version 12.4

[Leo Laohoo]

Hello i have a ip-cam that is connect with power inline on my cisco router,

Errr ... A router which provides PoE?  You either have a switch module or a switch.

i have ios version 12.4

You would need to be more specific than that. 

I am not even sure if your switch/router can support EnergyWise if you don't provide specific information.

Can you post the output to the command "sh version"?

[Yordi Mahieu]

Cisco IOS Software, C890 Software (C890-UNIVERSALK9-M), Version 15.2(3)T, RELEAS                                                                                                                     E SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Sat 24-Mar-12 02:02 by prod_rel_team

ROM: System Bootstrap, Version 12.4(22r)YB3, RELEASE SOFTWARE (fc1)

spui uptime is 2 weeks, 2 days, 14 hours, 7 minutes
System returned to ROM by reload at 19:48:20 CEST Sun Jan 20 2013
System restarted at 19:48:56 CEST Sun Jan 20 2013
System image file is "flash:c890-universalk9-mz.152-3.T.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco 892 (MPC8300) processor (revision 1.0) with 498688K/25600K bytes of memory.
Processor board ID FCZ16319166

9 FastEthernet interfaces
1 Gigabit Ethernet interface
1 ISDN Basic Rate interface
1 Virtual Private Network (VPN) Module
256K bytes of non-volatile configuration memory.
250880K bytes of ATA CompactFlash (Read/Write)

License Info:

License UDI:

-------------------------------------------------
Device#   PID                   SN
-------------------------------------------------
*0        CISCO892-K9           FCZ16319166

License Information for 'c890'
    License Level: advipservices   Type: Permanent
    Next reboot license Level: advipservices

Configuration register is 0x2102

spui#show energywise version

EnergyWise is Disabled

It is 1 Router with custumor, NO Energywise domaine, or software.... this one router has 3 IP-cam with poe, that i want to let reboot every day so --> shutdown interface or shutdown POE for 1 minute a day.

[Leo Laohoo · Accepted solution]

890?  I have alot of these in my network and EnergyWise is supported.

So you want your IP Camera to reboot every night?  Let's say midnight, OK?

!  Global
energywise domain  security shared-secret 
energywise importance 60
!  Time Range
time-range ON
 absolute start 00:00 01 February 2013
 periodic daily 0:01 to 23:59
time-range OFF
 absolute start 00:00 01 February 2013
 periodic daily 0:0 to 0:01
!  Interface
interface GigabitEthernet0/1
 energywise level 10 recurrence importance 70 time-range ON
 energywise level  0 recurrence importance 70 time-range OFF
 energywise importance 60

[Leo Laohoo]

Thanks for the ratings.