cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2739
Views
0
Helpful
2
Replies

Cisco IR829 software upgrade

Rajinder Parshad
Beginner
Beginner

Dear All,

 

How to set boot system parameter before reloading the router.

I have upload the bundle image via TFTP. I want to run this new image, but how to set the boot system parameter ?

Normal routers are easy to upgrade, here I can see hypervisor, Guest-OS which are a bit confusing. 

 

Can anyone helps me with the procedure to upgrade the IR829 router to the latest OS as I am having facing issues, so just wanted to upgrade. Currently the router is shipped with the normal OS without bundle image. If I want to upgrade the software, I have to download the bundle image and push it to the router and install the new OS.

 

I am done with pushing the OS to the router, but seeking for an information to install the new software. Can anyone paste the line by line upgrade procedure after pushing the OS step, with the description of that procedure.

 

Thanks 

2 Replies 2

balaji.bandi
VIP Community Legend VIP Community Legend
VIP Community Legend

John Godwyll Jnr
Beginner
Beginner

Supposing my new iOS name is ir800-universalk9-bundle.SPA.158-3.M6.bin

 

First copy tftp: flash:

Enter the remote ip of where the new iOS is located, make sure the tftp server is running as well.

 

after copying the new iOS to the flash drive of the ir829.

 

Enter in the privilege mode: bundle install flash:ir800-universalk9-bundle.SPA.158-3.M6.bin

 

Then wait for it to finish its installation.

 

Reload after completion.

 

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: