04-05-2021 06:07 AM
Having issues upgrading Cisco ISR 331 router from IOS 16..06.04 to 16.12.04. I have moved the file to the local flash and have attempted to run the only two upgrade commands I know:
boot system flash:/filename
boot system flash bootflash:/filename
I have downloaded the 16.12.04 file from Cisco and verified is a maintenance deployment. I have a small screen capture of the error. See the attached.
Solved! Go to Solution.
04-05-2021 06:51 AM
make sure you read the release notes and required version upgrade.
04-05-2021 06:50 AM
- Have an md5sum verification check of the image before and after downloading on the isr (the isr may support this command too) and or as a sanity check, try another (preferably more recent) from the cisco download site.
M.
04-05-2021 06:51 AM
make sure you read the release notes and required version upgrade.
04-05-2021 06:52 AM
- You may also find this document useful : https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_usr_cfg/configuration/xe-3s/sec-usr-cfg-xe-3s-book/sec-image-verifctn.pdf
M.
04-05-2021 03:15 PM
@mikeriley wrote:
%ERROR% Booting an incompatible image for this platform Failed to boot file bootflash:isr4400v2-universalk9.16.12.04.SPA.bin
The IOS file is meant for a "v2" and the appliance is not.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide