09-12-2007 01:35 AM - edited 03-03-2019 06:43 PM
Dear All,
I had Cisco Switch 2950 48port,when i turn on power it alway restart.how can i fix this problem?
i want to upload the new IOS but i don't how to upload.
Thanks
Rechard
Solved! Go to Solution.
09-12-2007 01:42 AM
Do you mean to say it goes into a restart loop?
It might be due to IOS corruption
you can use the break sequence and do a Xmodem recovery
http://www.cisco.com/en/US/products/hw/switches/ps628/products_tech_note09186a0080169696.shtml
HTH
Narayan
09-12-2007 01:42 AM
Do you mean to say it goes into a restart loop?
It might be due to IOS corruption
you can use the break sequence and do a Xmodem recovery
http://www.cisco.com/en/US/products/hw/switches/ps628/products_tech_note09186a0080169696.shtml
HTH
Narayan
09-16-2007 06:33 PM
Dear Narayan,
Thank you for your support.
Best Regards,
Rechard
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide