09-24-2009 11:50 AM - edited 03-04-2019 06:09 AM
Hi,
We need to configure one to one NAT for two IP address and one PAT for all remaining IP pool.
Can such one-to-one mapping configured in routers ( in ASA it is static (inside,outside).
Inside- IP1 mapped to Pub_IP1 with overload
Inside - IP2 mapped to Pub_IP2 with overload.
And rest of all indide IP NAT ( PAT ) with one PUB_IP3.
Can all these MAP settings be done on router.
Please share the experience.
Any example of one-to-one NAT on router is highly appreciable.
Thanks in advance.
Subodh
Solved! Go to Solution.
09-24-2009 12:11 PM
Subodh
inside -> fa0/0 R1 fa0/1 -> outside
192.168.5.10 mapped to 195.17.17.1
192.168.6.10 mapped to 195.17.17.2
rest of inside addresses natted to 195.17.17.3
R1
int fa0/0
ip nat inside
int fa0/1
ip nat outside
ip nat inside source static 192.168.5.10 195.17.17.1
ip nat inside source static 192.168.6.10 195.17.17.2
ip nat pool TPS 195.17.17.3 195.17.17.3 netmask 255.255.255.0
ip nat inside source list 101 pool TPS overload
access-list 101 permit ip any any
Jon
09-24-2009 12:11 PM
Subodh
inside -> fa0/0 R1 fa0/1 -> outside
192.168.5.10 mapped to 195.17.17.1
192.168.6.10 mapped to 195.17.17.2
rest of inside addresses natted to 195.17.17.3
R1
int fa0/0
ip nat inside
int fa0/1
ip nat outside
ip nat inside source static 192.168.5.10 195.17.17.1
ip nat inside source static 192.168.6.10 195.17.17.2
ip nat pool TPS 195.17.17.3 195.17.17.3 netmask 255.255.255.0
ip nat inside source list 101 pool TPS overload
access-list 101 permit ip any any
Jon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide