08-24-2023 04:23 AM - last edited on 08-25-2023 06:47 AM by Translator
I currently studying my CCNP SP thought CBT nuggets using EVE-NG, however I am up to doing VPLS.
My current
CSR1000v
only has ipbase and security which doesn't allow me to configure l2vpn config.
Is there anyway I can get an evaluation license or
csr1000v-adventerprisek9 ISO
so i can complete my study?
Thanks,
Tom
Solved! Go to Solution.
08-25-2023 12:24 AM
Cisco have new image model Universal that should cover many platforms and features all in there.
can you post show version, show boot License
l2vpn vfi context vfi100 (are you applying this config under interface ?) this should be global config.
08-24-2023 04:32 AM - last edited on 08-25-2023 06:53 AM by Translator
Run the command
license boot level
and use the ?. Take a look on the alternatives you have. If you are able to enable another license level, accept the EULA and reboot the router.
08-24-2023 04:52 AM
You will get full License with Bandwidth Limited for the Virtual Router. - as per i know there is no Limitation using the features
08-24-2023 04:54 AM
These are the options it gives me:
08-24-2023 05:09 AM
I dont believe then you can move to advanced. appx and ax is related to throughout capacity.
08-24-2023 05:47 AM - last edited on 08-25-2023 06:55 AM by Translator
Hello @ThomasCampbell64 ,
try to use
license boot level ax
save the config and reboot . In modern IOS XE the AX is the complete all features option
Hope to help
Giuseppe
08-24-2023 08:33 PM - last edited on 08-25-2023 06:57 AM by Translator
Yeah still seem to run into the issue with
AX boot level
The commands i am trying to input are:
int gi1
service instance 100 ethernet
encap dot1q 100
l2vpn vfi context vfi100 <<< this is where there is no option for l2vpn in the CLI
I think it requires the
adventerprisek9 IOS-XE
while i am using the
universalk9 IOS-XE
08-25-2023 12:24 AM
Cisco have new image model Universal that should cover many platforms and features all in there.
can you post show version, show boot License
l2vpn vfi context vfi100 (are you applying this config under interface ?) this should be global config.
08-25-2023 12:38 AM
Thank you!!!
Yes was doing this under the interface, that was the issue!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide