CSR1000v adventerprisek9 license

[ThomasCampbell64]

I currently studying my CCNP SP thought CBT nuggets using EVE-NG, however I am up to doing VPLS.

My current

CSR1000v

only has ipbase and security which doesn't allow me to configure l2vpn config.

Is there anyway I can get an evaluation license or

csr1000v-adventerprisek9 ISO

so i can complete my study?

Thanks,

Tom

[Flavio Miranda]

Hi @ThomasCampbell64 

 Run the command

license boot level

and use the ?.  Take a look on the alternatives you have. If you are able to enable another license level, accept the EULA and reboot the router.

[balaji.bandi]

You will get full License with Bandwidth Limited for the Virtual Router. - as per i know there is no Limitation using the features

[ThomasCampbell64]

These are the options it gives me:

[Flavio Miranda]

I dont believe then you can move to advanced. appx and ax is related to throughout capacity.

[Giuseppe Larosa]

Hello @ThomasCampbell64 ,

try to use

license boot level ax

save the config and reboot . In modern IOS XE the AX is the complete all features option

Hope to help

Giuseppe

[ThomasCampbell64]

Yeah still seem to run into the issue with

AX boot level

The commands i am trying to input are:

int gi1

service instance 100 ethernet

encap dot1q 100

l2vpn vfi context vfi100 <<< this is where there is no option for l2vpn in the CLI

I think it requires the

adventerprisek9 IOS-XE

while i am using the

universalk9 IOS-XE

 

[balaji.bandi · Accepted solution]

Cisco have new image model Universal that should cover many platforms and features all in there.

can you post show version, show boot License

l2vpn vfi context vfi100   (are you applying this config under interface ?) this should be global config.

[ThomasCampbell64]

Thank you!!!

Yes was doing this under the interface, that was the issue!