cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
553
Views
0
Helpful
2
Replies
Highlighted
Beginner

Debug ip packet IP: Output changed by feature=23:

hi.

has anyone seen this before, i want to debug web traffic from a host.

i have create an ACL "access-list 2010 permit tcp host 192.168.80.51 any eq www" then i did a debug ip packet 2010 detail.

and then this spams the console.

.Feb  9 13:10:46.248: IP: Output changed by feature=23: FastEthernet4 -> Vlan80 .Feb  9 13:10:46.256: IP: Output changed by feature=23: FastEthernet4 -> Vlan80 .Feb  9 13:10:46.304: IP: Output changed by feature=23: FastEthernet4 -> Vlan80 .Feb  9 13:10:46.304: IP: Output changed by feature=23: FastEthernet4 -> Vlan80 .Feb  9 13:10:46.304: IP: Output changed by feature=23: FastEthernet4 -> Vlan80 .Feb  9 13:10:46.304: IP: Output changed by feature=23: FastEthernet4 -> Vlan80 .Feb  9 13:10:46.368: IP: Output changed by feature=23: FastEthernet4 -> Vlan80 .Feb  9 13:10:46.384: IP: Output changed by feature=23: FastEthernet4 -> Vlan80

i have disable CEF and Fast Switching, on this small 800 series router.

im using NAT (NVI) on this router could i have anything to do with that ?

2 REPLIES 2
Highlighted
Rising star

Hi
it seems the issue is with the nat config

Sent from Cisco Technical Support iPhone App

Highlighted
Contributor

iOS has a complete packet capture facility that creates pcap files now if you have the correct version.

Sent from Cisco Technical Support iPad App