Design Question
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-16-2007 10:06 PM - edited 03-03-2019 07:12 PM
Hi all,
I have a question about designing a network. The plan is to have one HQ site with 4 branches for the start. But in the near future there will be up to 14 branches.
So what will be the best solution on a network basis, to be somehow resilient, cost effecive and some guarantee for bitrate and delay variation?
I thought that Frame-Relay would be a good choice since if I remember right it is based on ATM which has very godd QoS parameters..?
What do you think?
Thanks for your input.
Yves
- Labels:
-
Other Routing
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-17-2007 12:46 AM
Hi Yves
This all depends on your country and services providers operating there.
I would recommend getting a L3 MPLS VPN, this scales very well and you can get different offerings (Service Level Agreements) from your SP wrt. availability, QoS and jitter.
Regards
Phillip

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-17-2007 07:01 AM
Keeping up with the technology, MPLS can be a good solution.
Depending on the load & upload / download factors, adsl is another option.
FR is also a gud solution depending on availability & is economical as well.
Point-to-point with hub-spoke topology is one more option. But expensive.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-17-2007 09:54 PM
Thanks a lot for your Inputs.
Yves
