ā04-19-2018 08:59 PM - edited ā03-05-2019 10:18 AM
Please tell me if ISR 4000 support OC3/12 circuits. I haven't been able to find any information on cisco regarding OC3/OC12 support by ISR 4000. If ISR 4000 series routers don't support OC3/12 then please advise which other ISR series routers without an EOL announcement that can support these circuits, not interested in ASR series routers at this time.
Thanks for the help.
Solved! Go to Solution.
ā04-20-2018 06:13 AM - edited ā04-20-2018 06:33 AM
Hi
I probably dont have the answer for that but may be they are focusing the devices for enterprise and service providers, also you could evaluate the ASR 920 as showed on this link, it supports OC3 and OC12 modules as well. It has lowest cost than an ASR 1K.
:-)
ā04-20-2018 05:21 AM
Hi
The following link could be useful, unfortunately it mentions until ISR 3800, 3900 and ASR9K, but please let me try to find more info:
:-)
ā04-20-2018 05:48 AM - edited ā04-20-2018 05:49 AM
Julio,
Thanks for your comment and research. I don't understand how cisco is advertising ISR 4000 as a replacement for ISR 3900 series routers if they don't support these circuits. I could be wrong in my analysis, but so far I haven't found any document from cisco that states ISR 4000 support these circuits.
Please let me know when you have any updates.
ā04-20-2018 05:50 AM
Hi,
I think these features were moved to the ASR 1000 and 9K series.
ā04-20-2018 05:59 AM
Don't you think that's an overkill? that if a small company needs an oc3 or oc12 circuit they would need to buy ASRs which are way too expensive and too powerful for a small network.
ā04-20-2018 06:13 AM - edited ā04-20-2018 06:33 AM
Hi
I probably dont have the answer for that but may be they are focusing the devices for enterprise and service providers, also you could evaluate the ASR 920 as showed on this link, it supports OC3 and OC12 modules as well. It has lowest cost than an ASR 1K.
:-)
ā04-20-2018 06:21 AM
I appreciate your assistance.
ā04-20-2018 06:32 AM
You are welcome
:-)
ā04-20-2018 08:10 AM
Julio,
Is there any site/tool that you can recommend to get a quote for cisco devices? I am looking for a rough figure that is close enough. My cco is not authorized to use cisco tool for quotes.
ā04-20-2018 08:18 AM
Hi
Unfortunately the tool is authorized for Cisco Partners only. Try to contact to Cisco Sales or a Cisco Partner.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide