hi,How to capture the traffic in nexus 7018 which is going via dataplane.
Forum Posts
Hi Currently we are using two cisco 4500 series switches, and m confused that with below software and hardware information, Can I configure the VSS. Switch 1: License Information for 'WS-X45-SUP7-E' License Level: ipbase Type: Permanent Next reboot...
Since 1921 has two slots for EHWIC, Does it support two different cards, EHWIC-1GE-SFP-CU, EHWIC-4ESG? I need 2 WAN ports, 2 etherswitch ports, one fiber connection. I could not find that information in Cisco specs, please suggest. Appreciated in adv...
Resolved! OSPF Router LSA(Type 1 LSA)
I am studying Router LSA(Type 1 LSA) I know for different neighbors Type 1 LSA will give different Information.A) Interface with no neighbors( I have implemented with connecting R1 to a switch) 1) When there is no neighbor, R1 will send Hello but i...
We have implemented a new test system on our network. we have created SVIs with a IP range to have a /24. The following is an example of the format we have. The one machine and range in question are in two seperate vlans. Below is a configuration exa...
Hello Guys Greeting of the Day Pls advise on auto QOS on cisco 3750-X ( Acts as Access Switches where users are connected) and 2911 ( for Branch router) , thanks to cisco , auto QOS is such a tasty cake :) , save lots of reading Thanks all
Hi Guys in MPLS QOS , what is the most deployed and effective QOS motheod between PE-CE its Uniform-mode or short-pipe or long-pipe thanks all
Hi everyone, The QoS is my week point and I want to clarify ASP. Here are some stupid questions that I want to answer from you as you are expert of Cisco and QOS magic. 1. Is it compulsory to start marking voice traffic from IP Phone? 2. If IP ph...
Hi, I have got one LAN behind NAT and two ISP connections. I want to route five prefixes through the First-ISP and the rest traffic through the Second-ISP. I tried configuring route-maps but still unsuccessful. Please view the config below. Help wo...
Resolved! Cisco 2950 http server access
I can't seem to access the http page on the switch. I keep getting "server has dropped connection". IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA11, RELEASE SOFTWARE (fc2) Some relevant sections of my config. username admin privilege...
HiHow can i change the Boot image from a cisco 1841I have this config.boot-start-markerboot system flash:c1841-advsecurityk9-mz.151-1.T.binboot system flash:c1841-advsecurityk9-mz.124-22.T.binboot-end-markerbut the router always boots the 124-22.THow...
Resolved! Updating DMVPN encryption protocols
Hello, I am looking for advice on updating our DMVPN hub and spoke routers with new encryption and hashing protocols. I'd like to update them to: #crypto ipsec transform-set TSET2-new esp-aes 256 esp-sha-hmac My main question is, is there a way t...
I have an RV320 that I am trying to port forward port 8443 to and IIS server 10.1.10.xxx Port 443 is already being forwarded to a different IIS Server 10.1.10.yyy IIS Server is configured to bind on port 8443 & Internally I can access the website s...
I have two Nexus 7009 and they keep generated the below syslog. What does that mean? How can I stop this kind of logging?2013 Jul 5 11:53:21 N7009 last message repeated 1 time 2013 Jul 5 11:55:59 N7009 last message repeated 1 time2013 Jul 5 11:58:...
Resolved! IP SLA Tracking Question
Hello Experts, i want a route fail-over via three ways... 1. 172.30.64.1 must go via 172.24.18.6 if its available 2. if 1st not available then via 2nd route: 10.15.98.56..... 3. if 1st and 2nd route not available then via 3rd route: 10.15.98.50. My...
