cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
698
Views
0
Helpful
1
Replies

DRP

I Have two app servers in diferent locations. The servers are reached by IP Address (DNS or Proxy Caché isn't option) from remote sites.

We need establish a DR, in event of failure in central site, the backup should reach with the same IP (to not change the application  config in all PCs). 

Cloud is MPLS with BGP in each site.

drp.png

Thanks for your help.

1 Accepted Solution

Accepted Solutions

Philip D'Ath
VIP Alumni
VIP Alumni

You could buy a QinQ circuit from your provider to link the primary and DR site (easiest option).

You could deploy L2TPv3 to link the sites at layer 2.

You could use a new routing protocol like LISP.
http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Data_Center/DCI/5-0/LISPmobility/DCI_LISP_Host_Mobility/LISPmobile_4.html

You could use OTV.

You could use DCI.

It depends a lot of what kit you have already.

View solution in original post

1 Reply 1

Philip D'Ath
VIP Alumni
VIP Alumni

You could buy a QinQ circuit from your provider to link the primary and DR site (easiest option).

You could deploy L2TPv3 to link the sites at layer 2.

You could use a new routing protocol like LISP.
http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Data_Center/DCI/5-0/LISPmobility/DCI_LISP_Host_Mobility/LISPmobile_4.html

You could use OTV.

You could use DCI.

It depends a lot of what kit you have already.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco