Dual ISP Link failover in two different ISR 4431 router

[kajale.ankush48]

Hello All,

I have 01 ISR 4431 router in that 2 ISP link (MPLS-BGP) terminated and 01 LAN interface is configured with HSRP.

Now, client required router level redundancy. In which we have to terminate on link on one ISR router and other link in second ISR router with failover.

So, kindly suggest what configuration changes i have to do in new router as well as old router.

[balaji.bandi]

There is thread already have suggested some config (i do not like to re-invent the wheel here)

https://community.cisco.com/t5/routing/load-balancing-and-failover-for-isp-links/td-p/4037409

2 ISP link (MPLS-BGP)

not sure you running BGP here with ISP ?

https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13762-40.html

[kajale.ankush48]

not sure you running BGP here with ISP ?  Yes we are running the BGP with ISP.

[balaji.bandi]

Then look at the example of next URL it has some steps to follow.

[MHM Cisco World]

https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13768-hsrp-bgp.html

check this doc. for the config of BGP with HSRP.