Hi,
i have one eigrp topology running with two Autonomous system (AS100 and AS200), now the problem is am trying to block the network (4.4.4.4/32 AS100) from AS 100 to AS 200 and company policy not allowed to use Distribute-list for filtering.
i) First i try Standard ACL and apply under the interface won't work (the router has only one interface connected)
{ interface Serial1/0
ip address 123.0.0.3 255.255.255.0
ip access-group 1 in
R3#sh access-lists
Standard IP access list 1
10 deny 4.4.4.4
20 permit any (44 matches) }
ii) Second i try using PBR using unreachable metric (255) and applied under the interface same result won't work
R3#sh access-lists
Standard IP access list 1
10 permit 4.4.4.4
R3#sh route-map
route-map FILTER_R4, permit, sequence 10
Match clauses:
ip address 1
Set clauses:
metric 255
{ interface Serial1/0
ip address 123.0.0.3 255.255.255.0
ip policy route-map FILTER_R4 in }
iii) Third i try using Distance cmd under Eigrp config same result again not work !!
distance 255 4.4.4.4 0.0.0.0
R3#sh ip route 4.4.4.4
Routing entry for 4.4.4.4/32
Known via "eigrp 200", distance 170, metric 1075200, type external
Redistributing via eigrp 200
Last update from 123.0.0.1 on Serial1/0, 00:32:06 ago
Routing Descriptor Blocks:
* 123.0.0.1, from 123.0.0.1, 00:32:06 ago, via Serial1/0
Route metric is 1075200, traffic share count is 1
Total delay is 42000 microseconds, minimum bandwidth is 1544 Kbit
Reliability 255/255, minimum MTU 1500 bytes
Loading 255/255, Hops 2
Please give me the reason for why it not work using ACL, PBR and EIGRP Unreachable Distance also give me the solution for filtering this network
