06-08-2012 12:59 PM - edited 03-04-2019 04:37 PM
hi partners,
I have a router cisco 2800, but always is in rommon, the message show is:
device does not contain a valid file system
dir: cannot open device "bootflash:"
rommon 8 > dir usbflash0:
Checksum failed on c1840-usbfslib-m
Expected checksum: 91d6, calculated checksum: 4527
open: file "c1840-usbfslib-m" not found
open(): Open Error = -1
loadprog: error - on file open
cannot load the monitor library "bootflash:%c1840-usbfslib-m"
from device: usbflash0dir: cannot open device "usbflash0:"
what suggest me, for fix this equipment....
best regards....
06-08-2012 01:05 PM
It appears the usb device has a corrupted image. You should be able to download and copy the your necessary router image to the usb device and reboot the router.
HTH!
-Chris
06-09-2012 11:20 PM
Can you post the output to the command "dir flash:" please?
06-10-2012 12:35 AM
"Checksum failed on c1840-usbfslib-m"
Will a 1840 image run on a 2800 series?
06-10-2012 12:43 AM
Good catch Michael!
06-11-2012 02:11 AM
install new image of cisco 2800 through x-modem and tftp sever... in romman mode x-modem option is available there
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: