ESR6300 interface status display

[Yagel Himan]

The ESR6300 router "sh int status" display only the LAN ports, how can I show Duplex and Speed of the WAN ports?

 

[balaji.bandi]

check what other modules you have in the router - 

https://www.cisco.com/c/en/us/td/docs/routers/embedded/6300/software/config/b_ESR6300_config/b_ESR6300_config_chapter_011000.html

[Yagel Himan]

I have Gi0/0/0 & Gi0/0/1 onboard 

[balaji.bandi]

router ports you can view  as below :

show interfaces gigabitEthernet 0/0/0

Full Duplex, 1000Mbps, link type is auto, media type is RJ45

[Yagel Himan]

tried it, this command does nothing

ver 17.06