Hi,
I am configuring EVPN VPWS Preferred Path over SR-TE Policy on NCS 5501 routers, but after I commit config the l2vpn xconnect group did not shows neighbor IP address and state was down.
RP/0/RP0/CPU0:Leaf-A#sh l2vpn xconnect
Thu Jan 10 13:40:34.596 UTC
Legend: ST = State, UP = Up, DN = Down, AD = Admin Down, UR = Unresolved,
SB = Standby, SR = Standby Ready, (PP) = Partially Programmed
XConnect Segment 1 Segment 2
Group Name ST Description ST Description ST
------------------------ ----------------------------- -----------------------------
DeviceA-to-DeviceB
20922009-A DN Gi0/0/0/2.2 UP EVPN 1001,2,0.0.0.0 DN
----------------------------------------------------------------------------------------
RP/0/RP0/CPU0:Leaf-A#
RP/0/RP0/CPU0:Leaf-A#sh segment-routing traffic-eng policy summary
Thu Jan 10 13:40:10.966 UTC
XTC policy database summary:
----------------------------
IPv4 source address: 10.3.3.3
Total configured policies: 2
Operational: up 2 down 0
RP/0/RP0/CPU0:Leaf-A#
Topology:
Leaf-A ---> Core-A ---> Leaf-B
Leaf-A ---> Core-B ---> Leaf-B