08-07-2008 08:43 AM - edited 03-03-2019 11:04 PM
Hi,
I am having the following issue. My MetroE connection bounces from time to time, due to this the router starts trying to fallback and restore the connection until it gets stock. I would like to know if there is a command that I can enter on the interface (or router) in order for me to delay the MetroE interface recovery so the router can completely fallback.
For example, provide the interface with about 2 minutes before it gets recognize as active again by the router. Eigrp is enable on that interface.
Thanks.
08-07-2008 01:26 PM
Julio,
You haven't mentioned the hardware being used for the MetroE but ip dampening may be something that can help:
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t13/feature/guide/ftipevdp.html
HTH,
__
Edison.
09-17-2008 07:19 AM
Edison,
Thank you for your suggestion but this command does not apply to my configuration since one of its restrictions is that it can't track subinterfaces which is what I have configured.
Any other suggestions?
Thank you.
09-17-2008 10:08 AM
Any other suggestions?
Sorry, I don't have any.
__
Edison.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide