cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
477
Views
0
Helpful
2
Replies

FPD Log Messages / SIP 200 / 7600

Hi Dear,

Recently i have upgraded my 7606 router with 12.2(33) SRD8 IOS,but i notice these log messages:

*Oct 17 05:05:11 UTC: %FPD_MGMT-3-INCOMP_IMG_VER: Incompatible ROMMON (FPD ID=5) image version detected for 7600-SIP-200 card in slot 1. Detected version = 1.3, minimum required version = 1.4. Current HW version = 2.303.

*Oct 17 05:05:11 UTC: %FPD_MGMT-3-INCOMP_IMG_VER: Incompatible PEGASUS RX FPGA (FPD ID=4) image version detected for 7600-SIP-200 card in slot 1. Detected version = 1.5, minimum required version = 1.6. Current HW version = 2.303.

*Oct 17 05:08:25 UTC: %FPD_MGMT-3-INCOMP_IMG_VER: Incompatible I/O FPGA (FPD ID=2) image version detected for SPA-8XCHT1/E1 card in subslot 1/1. Detected version = 2.7, minimum required version = 2.8. Current HW version = 1.5.

Kindly, find the attached file.

It shows different output of different commands.

Any offer help is highly appreciated.

Regards,

Ahmed

2 Replies 2

any update please ?

your kind reply is appreciated.

Hi Ahmed,

I think it is a double post with other thread, see my reply there:

https://supportforums.cisco.com/message/3767775#3767775

Kind Regards,
Ivan Shirshin

**Please grade this post if you find it useful.

Kind Regards,
Ivan
Review Cisco Networking products for a $25 gift card