09-11-2007 08:36 AM - edited 03-03-2019 06:42 PM
I am working with 2621xm IOS (12.2(15)T10)
and I am looking for a basic QOS configuration to use so that I can prioritize traffic from my inside network to an external host IP. Below is what I think should work...please provide any suggestions/feedback.
class-map match-all CLASS-DEBIT
match access-group name Debit-out
!
!
policy-map QOSPOLICY
class CLASS-DEBIT
bandwidth 10
random-detect
ip access-list extended Debit-out
permit ip 10.200.10.0 0.0.0.255 XX.XX.XX.0 XXX.XXX.XXX.XXX
Applied to frame interface
frame-relay class QOSPOLICY
Solved! Go to Solution.
09-11-2007 11:49 AM
show frame pvc [dlci]
09-11-2007 08:59 AM
You can take a look at these documents for qos samples.
http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a0080094acb.shtml
http://www.cisco.com/en/US/tech/tk652/tk698/technologies_configuration_example09186a0080094af9.shtml
hth
hieu
09-11-2007 10:46 AM
'frame-relay class' command will reference a map-class not a class-map :)
class-map match-all CLASS-DEBIT
match access-group name Debit-out
!
!
policy-map QOSPOLICY
class CLASS-DEBIT
bandwidth 10
random-detect
map-class frame-relay QOSPOLICY
service-policy output QOSPOLICY
interface sx/x
frame-relay class QOSPOLICY
09-11-2007 11:30 AM
what are the show commands that can be used to see if this works?
I did a show int s0/0 and the queueing strategy is still FIFO
09-11-2007 11:49 AM
show frame pvc [dlci]
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide