10-11-2019 02:29 PM
I would like to achive a very simple configuration, but for some reason it's not working for me on the asr920.
Here is the layout I have.
And this is the configuration on the ASR:
interface GigabitEthernet0/0/0 description To_ISP ip address 165.228.132.26 255.255.255.248 no negotiation auto ! interface GigabitEthernet0/0/1 no ip address negotiation auto ... ip default-gateway 165.228.132.25 ... ip route 0.0.0.0 0.0.0.0 165.228.132.25
When I connect the PC to Gi0/0/1 the port turns green, but I can not ping or do anything out to the internet. The PC will ping its onw IP but nothing else. Not even .26 or .25
I have the Default GW on the PC set to 165.228.132.26 and mask is 255.255.255.248
Am I missing something on the routing part?
Thank you for your help!
Solved! Go to Solution.
10-11-2019 06:01 PM
I've got it working:
bridge-domain 1 member GigabitEthernet0/0/0 service-instance 1 member GigabitEthernet0/0/1 service-instance 1
...
bridge irb
...
interface GigabitEthernet0/0/0 no ip address negotiation auto cdp enable service instance 1 ethernet encapsulation untagged interface GigabitEthernet0/0/1 no ip address negotiation auto cdp enable service instance 1 ethernet encapsulation untagged
...
interface BDI1 ip address 165.228.132.26 255.255.255.248
10-11-2019 02:53 PM - edited 10-11-2019 02:55 PM
it will not be going to work, because those are routed interface, it only work if you like to make bridge those gi 0/0/0 and gi 0/0/1. (but that will be another requirement).
best example :
You need to configured Gi 0/0/1 with a private IP address, and PC should be in the same IP address range and configure NAT
as per the below document
Note: i can provide the samle config to work, but i always recommend understanding the person who does, so you will not depend on anyone in the future, so you solve the problem easily.
10-11-2019 03:15 PM - edited 10-11-2019 03:19 PM
But we do not want them to be NAT-ed. PC Should keep its Public IP Address.
10-11-2019 06:01 PM
I've got it working:
bridge-domain 1 member GigabitEthernet0/0/0 service-instance 1 member GigabitEthernet0/0/1 service-instance 1
...
bridge irb
...
interface GigabitEthernet0/0/0 no ip address negotiation auto cdp enable service instance 1 ethernet encapsulation untagged interface GigabitEthernet0/0/1 no ip address negotiation auto cdp enable service instance 1 ethernet encapsulation untagged
...
interface BDI1 ip address 165.228.132.26 255.255.255.248
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide