cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
757
Views
0
Helpful
3
Replies

High CPU Utilization on cisco 7206VXR

JOHNSON CHIRRA
Level 1
Level 1

                   Hi All,

High cpu utilization on cisco 7206 vxr router.please help me reslove the issue.

Error:%IP_VFR-3-OVERLAP_FRAGMENTS: GigabitEthernet0/1: from the host 10.2.2.1 destined to X.X.X.X

Cisco7206-IOR#show proc cpu | exc 0.00% 0.00%

CPU utilization for five seconds: 75%/70%; one minute: 68%; five minutes: 69%

PID Runtime(ms)   Invoked      uSecs   5Sec   1Min   5Min TTY Process

   1        3956     30100        131  0.00%  0.00%  0.00%   0 Chunk Manager   

   2      413260   2207668        187  0.00%  0.00%  0.00%   0 Load Meter      

   3           0         1          0  0.00%  0.00%  0.00%   0 chkpt message ha

   4           0         1          0  0.00%  0.00%  0.00%   0 EDDRI_MAIN      

   5    18090620   1262740      14326  0.00%  0.06%  0.05%   0 Check heaps     

   6       37780     10006       3775  0.00%  0.00%  0.00%   0 Pool Manager 

========================================

                    1                                          

    777667778887777809888877787777888778788787767756766666765665

    995642152009289305143075446746511570915916291581184398698278

100                 **                                         

90                 #*            *       *                    

80 ***    *###* *###*###*** #** *##******#***   *        *    

70 ##** *####################################****  **  ****  *

60 ##############################################*#########**#*

50 ############################################################

40 ############################################################

30 ############################################################

20 ############################################################

10 ############################################################

   0....5....1....1....2....2....3....3....4....4....5....5....6

             0    5    0    5    0    5    0    5    0    5    0

               CPU% per minute (last 60 minutes)

              * = maximum CPU%   # = average CPU%                     1                                          
    

1 Accepted Solution

Accepted Solutions

Ahad Aboss
Level 1
Level 1

Your router encountered overlap fragments which means that the offset of one fragment overlaps the offset of another fragment.

It appears to be an attack, configure a static ACL to prevent further  overlap fragments from the sender

View solution in original post

3 Replies 3

Ahad Aboss
Level 1
Level 1

Your router encountered overlap fragments which means that the offset of one fragment overlaps the offset of another fragment.

It appears to be an attack, configure a static ACL to prevent further  overlap fragments from the sender

Hi

Thanks your inputs

johnson.

hi all ,

me too i have the  same log and i had cpu high on router 7604 ,

i foudn that log on my 7200 router , and there exist another router 7604

cpu of 7200 stay fine but the 7600 router got high cpu !!!!!

the question is  how that occured ??

and prevent next attacks ???

wish to give me more details :

wish to help ASAP

regards

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco