how to implement PIM SM on switch

[kingstdz]

Hello

I have video flow udp://ip@port injected on vlanx switch cisco 9200 witch differents vlan

this switch is connected to topology until switch core 9500 

i want to view ud://ip@port in another vlany who can ping hosts under vlanx (who content video streaming channel)

hosts off same vlanx can view but hosts vlany no, i will use PIM SM to have streaming video in vlan y or other.

please help me 

thanks

[balaji.bandi]

how is your Multicast config on both the Cat 9200 ? is this working on same VLAN first ? before you extend to other switch ?

what client you using - most case by default TTL 1 that need to increase to reach the media server

good example thread :

https://community.cisco.com/t5/switching/multicast-streaming-video-with-vlc-across-vlans-routers/td-p/1753789

[kingstdz]

hi thanks for your replay

how is your Multicast config on both the Cat 9200 ? i haven't idea but igmp exist

is this working on same VLAN first? yes they have all same vlans (16, 39,...)

please can guide me more ? i have ikusi flow i wan to get the streaming in other vlan, i have route between vlan (inter vlan )

thanks

[balaji.bandi]

check the video help you to setup :

https://www.youtube.com/watch?v=Gjt2L9jAYNA

[Georg Pauwen]

Hello,

post a schematic drawing of your topology showing how all devices involved are connected, as well as the running configurations (sh run) of all devices involved.