10-02-2005 09:37 PM - edited 03-03-2019 10:38 AM
Dear All;
I have Cisco Catalyst Switch 4006 with Supervisor II OS with 4232-L3 routing module, witch is configured for 5 VLANS, each VLAN cann't communicate with others.
I want to make VLAN 5 as a common VLAN so it can communicate with all others VLANS.
Attached is a copy of my show running-config on the routing blade
Please Help
Thanks
11-16-2005 06:13 PM
is the gigabit subinfterface for vlan 5 is up then?
which port is your laptop attached to?
please give us the copy of show vlan in the switching module, and show interface gigabitEthernet3.5
because last time the 'line protocol' of gigabitethernet3.5 is still down, line protocol status indicate that there is 'something' wrong with layer 2.
this could be the vlan assignments in switching module, or the configuration between switching module and the routing module.
rgrds
11-20-2005 10:37 PM
11-22-2005 03:00 AM
hai,
just searching my old doc's
and find this useful links
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/inst_nts/78_10164.htm
i allready see the file "show vlan.txt", status of vlan 5 in switching module is active,
but i don't know whether the status of interface gigabitethernet3.5 is up or down
let's cek those 3 links first, maybe we missed some step.
rgds,
handoko
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide