05-22-2019 08:04 PM
Okay, I'm a newbie and hope this question won't sound stupid to you guys. I've a topology shown in the figure. I use ROAS on the left hand side, and obviously I can't ping the right hand side from the left hand side. Is it possible for both sides to communicate with each other? What should I do if I want them all connected to one another? (or is this kind of topology simply wrong?)
05-23-2019 12:04 AM
You just need the routers to exchange routes for their local subnets.
You can do this with either static routes or you can use a routing protocol, up to you really.
Jon
05-23-2019 12:15 AM
Hi @kkct ,
Try with this:
Router0
Router(config)# ip route 192.168.2.0 255.255.255.0 10.10.10.2
Router(config)# ip route 192.168.3.0 255.255.255.0 10.10.10.2
Router1
Router(config)# ip route 192.168.1.0 255.255.255.0 10.10.10.1
Also, you must make sure that the PCs have the correct gateway
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide