cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
7640
Views
5
Helpful
3
Replies

How to switchover to redundant ESP on ASR1006?

huangedmc
Level 3
Level 3

It looks you can switchover to the redundant RP by "redundancy force-switchover" command.

But what about the ESP?

How can I switchoever to the redundant ESP w/o waiting for a failure on active blade to occur?

I've gone through several config guides, but all they talk about is high availability for routing protocols and SSO.

1 Accepted Solution

Accepted Solutions

skarthic
Cisco Employee
Cisco Employee

Have you tried the 'redundancy force-switchover fp' command.

CARRR01#sh pla

Chassis type: ASR1006            

Slot      Type                State                 Insert time (ago)

--------- ------------------- --------------------- -----------------

0         ASR1000-SIP10       ok                    2w0d         

0/0      SPA-5X1GE-V2        ok                    2w0d         

1         ASR1000-SIP10       ok                    2w0d         

R0        ASR1000-RP2         ok, active            2w0d         

F0        ASR1000-ESP10       ok, active            2w0d         

F1        ASR1000-ESP10       ok, standby           2w0d         

P0        ASR1006-PWR-AC      ps, fail              2w0d         

P1        ASR1006-PWR-AC      ok                    2w0d         

Slot      CPLD Version        Firmware Version                       

--------- ------------------- ---------------------------------------

0         09111601            12.2(33r)XNC                       

1         07091401            12.2(33r)XN2                       

R0        10021901            12.2(33r)XND                       

F0        07091401            12.2(33r)XNC                       

F1        07091401            12.2(33r)XNC                       

CARRR01#red

CARRR01#redundancy fo

CARRR01#redundancy force-switchover ?

  fp  Execute fp switchover

 

CARRR01#redundancy force-switchover fp

CARRR01#redundancy force-switchover fp ?

 

CARRR01#redundancy force-switchover fp

Proceed with switchover to standby FP? [confirm]

CARRR01#

*Sep 15 03:26:19.147: %CMRP-6-FP_SB_RELOAD_REQ: R0/0: cmand:  Reloading Standby FP: initiated by FP switchover message

*Sep 15 03:26:19.150: %IOSXE_OIR-6-OFFLINECARD: Card (fp) offline in slot F0

*Sep 15 03:26:19.463: %CMRP-6-FP_HA_STATUS: R0/0: cmand:  F1 redundancy state is Active

CARRR01#sh platform

Chassis type: ASR1006            

Slot      Type                State                 Insert time (ago)

--------- ------------------- --------------------- -----------------

0         ASR1000-SIP10       ok                    2w0d         

0/0      SPA-5X1GE-V2        ok                    2w0d         

1         ASR1000-SIP10       ok                    2w0d         

R0        ASR1000-RP2         ok, active            2w0d         

F0        ASR1000-ESP10       booting               2w0d         

F1        ASR1000-ESP10       ok, active            2w0d         

P0        ASR1006-PWR-AC      ps, fail              2w0d         

P1        ASR1006-PWR-AC      ok                    2w0d         

Slot      CPLD Version        Firmware Version                       

--------- ------------------- ---------------------------------------

0         09111601            12.2(33r)XNC                       

1         07091401            12.2(33r)XN2                       

R0        10021901            12.2(33r)XND                       

F0        07091401            12.2(33r)XNC                       

F1        07091401            12.2(33r)XNC                       

*Sep 15 03:27:20.681: %IOSXE_OIR-6-ONLINECARD: Card (fp) online in slot F0

CARRR01#sh platform

Chassis type: ASR1006            

Slot      Type                State                 Insert time (ago)

--------- ------------------- --------------------- -----------------

0         ASR1000-SIP10       ok                    2w0d         

0/0      SPA-5X1GE-V2        ok                    2w0d         

1         ASR1000-SIP10       ok                    2w0d         

R0        ASR1000-RP2         ok, active            2w0d         

F0        ASR1000-ESP10       init, standby         2w0d         

F1        ASR1000-ESP10       ok, active            2w0d         

P0        ASR1006-PWR-AC      ps, fail              2w0d         

P1        ASR1006-PWR-AC      ok                    2w0d         

Slot      CPLD Version        Firmware Version                       

--------- ------------------- ---------------------------------------

0         09111601            12.2(33r)XNC                       

1         07091401            12.2(33r)XN2                       

R0        10021901            12.2(33r)XND                       

F0        07091401            12.2(33r)XNC                       

F1        07091401            12.2(33r)XNC                       

*Sep 15 03:27:40.740: %CPPHA-7-START: F0: cpp_ha:  CPP 0 preparing image /tmp/sw/fp/0/0/fp/mount/usr/cpp/bin/qfp-ucode-esp10

*Sep 15 03:27:41.211: %CPPHA-7-START: F0: cpp_ha:  CPP 0 startup init image /tmp/sw/fp/0/0/fp/mount/usr/cpp/bin/qfp-ucode-esp10

*Sep 15 03:27:46.492: %CPPHA-7-START: F0: cpp_ha:  CPP 0 running init image /tmp/sw/fp/0/0/fp/mount/usr/cpp/bin/qfp-ucode-esp10

*Sep 15 03:27:46.763: %CPPHA-7-READY: F0: cpp_ha:  CPP 0 loading and initialization complete

*Sep 15 03:27:48.175: %IOSXE-6-PLATFORM: F0: cpp_cp: Process CPP_PFILTER_EA_EVENT__API_CALL__REGISTER

*Sep 15 03:27:51.358: %CMRP-6-FP_HA_STATUS: R0/0: cmand:  F0 redundancy state is Standby ver | in IOS

CARRR01#sh platform

Chassis type: ASR1006            

Slot      Type                State                 Insert time (ago)

--------- ------------------- --------------------- -----------------

0         ASR1000-SIP10       ok                    2w0d         

0/0      SPA-5X1GE-V2        ok                    2w0d         

1         ASR1000-SIP10       ok                    2w0d         

R0        ASR1000-RP2         ok, active            2w0d         

F0        ASR1000-ESP10       ok, standby           2w0d         

F1        ASR1000-ESP10       ok, active            2w0d         

P0        ASR1006-PWR-AC      ps, fail              2w0d         

P1        ASR1006-PWR-AC      ok                    2w0d         

Slot      CPLD Version        Firmware Version                       

--------- ------------------- ---------------------------------------

0         09111601            12.2(33r)XNC                       

1         07091401            12.2(33r)XN2                       

R0        10021901            12.2(33r)XND                       

F0        07091401            12.2(33r)XNC                       

F1        07091401            12.2(33r)XNC                       

View solution in original post

3 Replies 3

skarthic
Cisco Employee
Cisco Employee

Have you tried the 'redundancy force-switchover fp' command.

CARRR01#sh pla

Chassis type: ASR1006            

Slot      Type                State                 Insert time (ago)

--------- ------------------- --------------------- -----------------

0         ASR1000-SIP10       ok                    2w0d         

0/0      SPA-5X1GE-V2        ok                    2w0d         

1         ASR1000-SIP10       ok                    2w0d         

R0        ASR1000-RP2         ok, active            2w0d         

F0        ASR1000-ESP10       ok, active            2w0d         

F1        ASR1000-ESP10       ok, standby           2w0d         

P0        ASR1006-PWR-AC      ps, fail              2w0d         

P1        ASR1006-PWR-AC      ok                    2w0d         

Slot      CPLD Version        Firmware Version                       

--------- ------------------- ---------------------------------------

0         09111601            12.2(33r)XNC                       

1         07091401            12.2(33r)XN2                       

R0        10021901            12.2(33r)XND                       

F0        07091401            12.2(33r)XNC                       

F1        07091401            12.2(33r)XNC                       

CARRR01#red

CARRR01#redundancy fo

CARRR01#redundancy force-switchover ?

  fp  Execute fp switchover

 

CARRR01#redundancy force-switchover fp

CARRR01#redundancy force-switchover fp ?

 

CARRR01#redundancy force-switchover fp

Proceed with switchover to standby FP? [confirm]

CARRR01#

*Sep 15 03:26:19.147: %CMRP-6-FP_SB_RELOAD_REQ: R0/0: cmand:  Reloading Standby FP: initiated by FP switchover message

*Sep 15 03:26:19.150: %IOSXE_OIR-6-OFFLINECARD: Card (fp) offline in slot F0

*Sep 15 03:26:19.463: %CMRP-6-FP_HA_STATUS: R0/0: cmand:  F1 redundancy state is Active

CARRR01#sh platform

Chassis type: ASR1006            

Slot      Type                State                 Insert time (ago)

--------- ------------------- --------------------- -----------------

0         ASR1000-SIP10       ok                    2w0d         

0/0      SPA-5X1GE-V2        ok                    2w0d         

1         ASR1000-SIP10       ok                    2w0d         

R0        ASR1000-RP2         ok, active            2w0d         

F0        ASR1000-ESP10       booting               2w0d         

F1        ASR1000-ESP10       ok, active            2w0d         

P0        ASR1006-PWR-AC      ps, fail              2w0d         

P1        ASR1006-PWR-AC      ok                    2w0d         

Slot      CPLD Version        Firmware Version                       

--------- ------------------- ---------------------------------------

0         09111601            12.2(33r)XNC                       

1         07091401            12.2(33r)XN2                       

R0        10021901            12.2(33r)XND                       

F0        07091401            12.2(33r)XNC                       

F1        07091401            12.2(33r)XNC                       

*Sep 15 03:27:20.681: %IOSXE_OIR-6-ONLINECARD: Card (fp) online in slot F0

CARRR01#sh platform

Chassis type: ASR1006            

Slot      Type                State                 Insert time (ago)

--------- ------------------- --------------------- -----------------

0         ASR1000-SIP10       ok                    2w0d         

0/0      SPA-5X1GE-V2        ok                    2w0d         

1         ASR1000-SIP10       ok                    2w0d         

R0        ASR1000-RP2         ok, active            2w0d         

F0        ASR1000-ESP10       init, standby         2w0d         

F1        ASR1000-ESP10       ok, active            2w0d         

P0        ASR1006-PWR-AC      ps, fail              2w0d         

P1        ASR1006-PWR-AC      ok                    2w0d         

Slot      CPLD Version        Firmware Version                       

--------- ------------------- ---------------------------------------

0         09111601            12.2(33r)XNC                       

1         07091401            12.2(33r)XN2                       

R0        10021901            12.2(33r)XND                       

F0        07091401            12.2(33r)XNC                       

F1        07091401            12.2(33r)XNC                       

*Sep 15 03:27:40.740: %CPPHA-7-START: F0: cpp_ha:  CPP 0 preparing image /tmp/sw/fp/0/0/fp/mount/usr/cpp/bin/qfp-ucode-esp10

*Sep 15 03:27:41.211: %CPPHA-7-START: F0: cpp_ha:  CPP 0 startup init image /tmp/sw/fp/0/0/fp/mount/usr/cpp/bin/qfp-ucode-esp10

*Sep 15 03:27:46.492: %CPPHA-7-START: F0: cpp_ha:  CPP 0 running init image /tmp/sw/fp/0/0/fp/mount/usr/cpp/bin/qfp-ucode-esp10

*Sep 15 03:27:46.763: %CPPHA-7-READY: F0: cpp_ha:  CPP 0 loading and initialization complete

*Sep 15 03:27:48.175: %IOSXE-6-PLATFORM: F0: cpp_cp: Process CPP_PFILTER_EA_EVENT__API_CALL__REGISTER

*Sep 15 03:27:51.358: %CMRP-6-FP_HA_STATUS: R0/0: cmand:  F0 redundancy state is Standby ver | in IOS

CARRR01#sh platform

Chassis type: ASR1006            

Slot      Type                State                 Insert time (ago)

--------- ------------------- --------------------- -----------------

0         ASR1000-SIP10       ok                    2w0d         

0/0      SPA-5X1GE-V2        ok                    2w0d         

1         ASR1000-SIP10       ok                    2w0d         

R0        ASR1000-RP2         ok, active            2w0d         

F0        ASR1000-ESP10       ok, standby           2w0d         

F1        ASR1000-ESP10       ok, active            2w0d         

P0        ASR1006-PWR-AC      ps, fail              2w0d         

P1        ASR1006-PWR-AC      ok                    2w0d         

Slot      CPLD Version        Firmware Version                       

--------- ------------------- ---------------------------------------

0         09111601            12.2(33r)XNC                       

1         07091401            12.2(33r)XN2                       

R0        10021901            12.2(33r)XND                       

F0        07091401            12.2(33r)XNC                       

F1        07091401            12.2(33r)XNC                       

Was just wondering what the fp option does.

Probably stands for forwarding processor.

thank you.

You are right, FP stands for Forwarding Processor (ESP).

Kind Regards,
Ivan Shirshin

Kind Regards,
Ivan
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: