08-29-2005 10:02 PM - edited 03-03-2019 10:22 AM
I had a Cisco 2811 router whose ios image is ios 12.4(T) with advanced security. This image doesn't support BGP.
error message it gives when I m trying to configure BGP is::
Protocol not in this ios image.
08-29-2005 10:24 PM
BGP is supported on both older hardware and older ios versions. Most likely the image you have applied just doesn't support bgp. You will need an image that does. If you will post your show ver we will know more about what your ios version supports.
08-30-2005 02:06 AM
This is the show version output
ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)
ghaziabad uptime is 23 minutes
System returned to ROM by power-on
System restarted at 09:51:49 UTC Mon Aug 22 2005
System image file is "flash:c2800nm-advsecurityk9-mz.124-1a.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found
at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco 2811 (revision 53.51) with 249856K/12288K bytes of memory.
Processor board ID FHK0931F01W
2 FastEthernet interfaces
6 Serial(sync/async) interfaces
4 ISDN Basic Rate interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
08-30-2005 02:17 AM
Hi anjaneesh,
Sorry to say the code you are running does not support BGP. It do support EIGRP, OSPF, RIp but not BGP.
Check this link
Open this link first
1) http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
Then click on
2) Search by Software/Image Name/Product Code/Platform
Then enter your full image name under section Image Name
and serach it will give u 3 optiosn for router and selct your router and it will show you the features it supports and it doe snot support BGP.
HTH
Ankur
08-30-2005 04:06 AM
Thankx Ankur
That solved my problem.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide