06-17-2013 07:26 AM - edited 03-04-2019 08:13 PM
Hi,
I have set up IP SLA on a device and probing 10 different devices from it.
Everything is working except that I am not able to generate syslog messages.
This is my configration :
ip sla 1
udp-echo 10.83.xx.xx 2000
threshold 25
frequency 10
history lives-kept 2
history filter failures
ip sla reaction-configuration 1 react rtt threshold-value 25 22 threshold-type immediate action-type trapOnly
I have these two commandsd in place as well:
ip sla logging traps
snmp-server enable traps ipsla
Any idea what i am doing wrong or what am I missing?
06-17-2013 02:34 PM
Hi,
1. Try this command:
snmp-server enable traps rtr
Pls let me know.
2. You can also configure EEM (Embedded Event Manager) script to monitor the IP SLA.
Link to the instruction: Generating syslog alarms for RTR/IP SLA probes
________________
Best regards,
MB
06-18-2013 07:15 AM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: