ISR4431 only reload the NIM-LTEA

[mehmet cagiran]

Hi all,

I have a  ISR4431 with NIM-LTEA  module. 

IOS-XE version 16.09.05

I want to reload only NIM-LTEA module not whole router.  Is there any way?

[Kasun Bandara · Accepted solution]

@mehmet cagiran this guides will help.

Cisco 4G LTE and Cisco 4G LTE-Advanced Network Interface Module Software Configuration Guide - Cisco

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/e/gs/guide/b_Getting_Started_Guide/b_3_x_Getting_Started_Guide_appendix_01100.pdf

[mehmet cagiran]

hi Kasun Bandara,

Thank for your replay.

I found a topic titled

ucse subslot server

on the second link you shared.

ucse subslot server

To reload, reset, start, or stop the hardware on the server module, use the

ucse subslot server

command in privileged EXEC mode.

There is a command; 

Router # hw-module subslot 0/NIM-slot-number reload

When i run

sh run platform

command my router for learn my nım module slot;

the result is Slot 0/1 type NIM-LTEA-EA  

I think this command will work :

 Router # hw-module subslot 0/1 reload

What is your opinion on this matter?

thanks

Mehmet 

[balaji.bandi · Accepted solution]

first display the slot informaton - and check is that correct and do the action:

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/interface/command/ir-cr-book/ir-f1.html