11-03-2019 11:31 PM
Hi Guys,
i am extending current SVI from Old Core to New Core switch through OSPF but unable to ping from Old to new switch and vice versa.
please find attached diagram, anny suggestions?
Solved! Go to Solution.
11-04-2019 12:03 AM
Hello,
at first glance I would say you need to announce the networks below on the Core switch:
Old Core
router ospf 1
--> network 10.196.211.44 0.0.0.3 area 0
--> network 10.196.211.48 0.0.0.3 area 0
11-04-2019 04:30 AM
Hi,
As per your configuration, the OLD switch is not having neighborship with both new switches. Change as well:
router ospf 1
network 10.196.211.44 0.0.0.3 area 0
network 10.196.211.48 0.0.0.3 area 0
11-04-2019 12:03 AM
Hello,
at first glance I would say you need to announce the networks below on the Core switch:
Old Core
router ospf 1
--> network 10.196.211.44 0.0.0.3 area 0
--> network 10.196.211.48 0.0.0.3 area 0
11-04-2019 04:30 AM
Hi,
As per your configuration, the OLD switch is not having neighborship with both new switches. Change as well:
router ospf 1
network 10.196.211.44 0.0.0.3 area 0
network 10.196.211.48 0.0.0.3 area 0
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: