cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
495
Views
0
Helpful
2
Replies

Issue with PIM-SSM Multicast Configuration ISR4431s

I have an issue with my PIM-SSM multicast configuration using ISR4431s. 

 

I am wanting to forward broadcast data from an application from one VLAN in on the multicast source to another VLAN on a multicast router on a small network.  The method I am using is PIM-SSM.  I have a multicast source R1, a multicast transition router R2, and a multicast receiver, the R3 device.

 

Any insight into why the broadcast data is not forwarding is welcome.

 

Here is the topology:

              R1---R2---R3

                R1                                                     R2                                              R3

vlan 100 (IP: 10.1.1.1)--10.194.234.226-|--G0/0/0 (IP: 10.194.234.225)---G0/0/0 (IP: 10.156.51.225)-|-G0/0/0 IP: (10.156.51.226)--vlan 600 (IP: 192.142.1.1)

R1 Config (Multicast Source):

!
hostname R1
!
ip multicast-routing distributed
!
ip pim spt-threshold infinity
!
ip pim ssm default
!
no ip igmp snooping
!
vtp mode transparent
!
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
vlan 100
!
interface GigabitEthernet0/0/0
ip address 10.194.234.226 255.255.255.252
ip nat outside
ip pim sparse-dense-mode
!
interface GigabitEthernet0/1/0
switchport access vlan 100
switchport mode access
!
interface GigabitEthernet0/1/1
switchport access vlan 100
switchport mode access
!
interface GigabitEthernet0/1/2
switchport access vlan 100
switchport mode access
!
interface GigabitEthernet0/1/3
switchport access vlan 100
switchport mode access
!
interface GigabitEthernet0/1/4
switchport access vlan 100
switchport mode access
!
interface GigabitEthernet0/1/5
switchport access vlan 100
switchport mode access
!
interface GigabitEthernet0/1/6
switchport access vlan 100
switchport mode access
!
interface GigabitEthernet0/1/7
switchport access vlan 100
switchport mode access
!
interface Vlan100
description /// 10.1.1.1 is the VLAN 100 IP address ///
ip address 10.1.1.1 255.255.255.0
ip nat inside
ip pim sparse-dense-mode
ip multicast helper-map broadcast 232.1.1.1 bcast-to-mcast ttl 50
!
ip forward-protocol udp 3205
!
ip nat inside source static udp 10.1.1.71 3205 10.194.234.226 3205 extendable
!
ip route 0.0.0.0 0.0.0.0 G0/0/0
!
ip access-list extended bcast-to-mcast
permit udp any any eq 3205
!
end

 

R2 Config (Multicast Transition Router):

!
hostname R2
!
ip multicast-routing distributed
!
ip pim spt-threshold infinity
!
vtp mode transparent
!
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
vlan 100
!
interface GigabitEthernet0/0/0
ip address 10.194.234.225 255.255.255.252
ip pim sparse-dense-mode
no shutdown
negotiation auto
!
interface GigabitEthernet0/0/1
ip address 10.156.51.225 255.255.255.252
ip pim sparse-dense-mode
no shutdown
negotiation auto
!
interface GigabitEthernet0/1/0
!
interface GigabitEthernet0/1/1
!
interface GigabitEthernet0/1/2
!
interface GigabitEthernet0/1/3
!
interface GigabitEthernet0/1/4
!
interface GigabitEthernet0/1/5
!
interface GigabitEthernet0/1/6
!
interface GigabitEthernet0/1/7
!
interface Vlan100
description /// 10.10.1.1 is the VLAN 100 IP address ///
ip address 10.10.1.1 255.255.255.0
ip nat inside
ip pim sparse-dense-mode
ip multicast helper-map broadcast 232.1.1.1 bcast-to-mcast ttl 50
!
ip forward-protocol udp 3205
!
ip nat inside source static udp 10.1.1.71 3205 10.194.234.226 3205 extendable
!
ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/0/0
ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/0/1
!
!
end

 

R3 Config (Multicast Receiver, NOTE:  192.142.1.99 is not the device that is receiving the data.  Other devices on vlan 600 need the data):

 

!
hostname R3
!
ip multicast-routing distributed
!
ip pim spt-threshold infinity
!
ip pim ssm default
!
no ip igmp snooping
!
vtp mode transparent
!
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
vlan 600
!
interface GigabitEthernet0/0/0
ip address 10.156.51.226 255.255.255.252
ip pim sparse-dense-mode
ip multicast helper-map 232.1.1.1 192.142.1.255 bcast-to-mcast
ip igmp version 3
negotiation auto
!
interface GigabitEthernet0/1/0
switchport access vlan 600
switchport mode access
!
interface GigabitEthernet0/1/1
switchport access vlan 600
switchport mode access
!
interface GigabitEthernet0/1/2
switchport access vlan 600
switchport mode access
!
interface GigabitEthernet0/1/3
switchport access vlan 600
switchport mode access
!
interface GigabitEthernet0/1/4
switchport access vlan 600
switchport mode access
!
interface GigabitEthernet0/1/5
switchport access vlan 600
switchport mode access
!
interface GigabitEthernet0/1/6
switchport access vlan 600
switchport mode access
!
interface GigabitEthernet0/1/7
switchport access vlan 600
switchport mode access
!
interface Vlan600
ip address 192.142.1.1 255.255.255.0
ip broadcast-address 192.142.1.255
ip directed-broadcast
ip pim sparse-dense-mode
ip igmp join-group 232.1.1.1 source 10.194.234.226
ip igmp version 3
!
ip forward-protocol udp 3205
!
ip nat inside source static tcp 192.142.1.99 61000 10.156.51.226 61000 extendable
!
ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/0/0
!
ip access-list extended bcast-to-mcast
permit udp any any eq 3205
!
end

 

 

2 Replies 2