Hi All,
I've got this query and can't figure it out with the Cisco docs so wondered if anyone can help me here.
Assuming I have the following setup:
- Cisco 7604
- Cisco Systems Cisco 7600 4-slot Chassis System
- OSR-7600 Clock FRU 1 & 2
- WS-F6K-MSFC2A Cat6k MSFC 2A daughterboard Rev. 4.0
- WS-F6K-PFC3B Policy Feature Card 3 Rev. 2.4
- WS-SUP32-GE-3B 9 ports Supervisor Engine 32 8GE Rev. 4.6
- WS-X6148A-GE-TX 48-port 10/100/1000 RJ45 EtherModule Rev. 4.1
- WS-X6548-GE-TX SFM-capable 48 port 10/100/1000mb RJ45 Rev. 11.3
The SUP32-3c says it supports both L2VPN and L2TPv3, however the line cards are effectively 6500 line cards and I was under the impression the 6500 didn't support these.
If the supervisor supports a feature does that mean it is globally supported on a switch? Or do I need to check the compatibility of these line cards as to if they support these features? - If so can anyone advise as I'm a bit stumpted.
Many Thanks!
Tom
