missing pseudowire-class in 1801

[lajoe.aal]

Hi all,

I'm trying to configure client-initiated l2tp on my 1801 box, but I don't have pseudowire-class on the general config help menu...

Does anyone know why I don't have pseudowire-class in my global config?

[Cisco 1801/IOS 12.4(15)T7]

[image c180x-broadband-mz.124-15.T7.bin]

Thank you

LAJoe

[Edison Ortiz]

LAJoe,

You need Advanced IP Services, Advanced Enterprise Services, SP services or Enterprise Services feature set.

The IP broadband feature set is too basic for this service.

HTH,

__

Edison.

[lajoe.aal]

Hi Edison

I hear what you are saying.

However, when I look up my image in the CFN (Cisco Feature Navigator site - http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp) I see that "L2TP Client Initiated Tunneling" is listed for the Broadband feature set.

Any ideas? Maybe a typo?

LAJoe

[Edison Ortiz]

LAJoe,

Thanks for posting the intended feature and you are right. I was looking under another feature and it provided the information I posted.

I will be curious if you were to upgrade to the recommended feature set and the command is available.

I don't have a 1800 router around so I can't test for you.

__

Edison.

[lajoe.aal]

Hi,

I am trying to get the upgrade pack for my 1801 (FL1801-BB-AISK9= Cisco 1801 IP Broadband to Advanced IP Services Upgrade), so I should have the answer in a couple of days.

I will post here if this solves my problem.

Thank you again

LAJoe

[Farooq Razzaque]

Hi

[jasoncoxlee]

Was there ever a solution to this?

1841 running..

(C1841-ADVSECURITYK9-M), Version 15.1(4)M12a, RELEASE SOFTWARE (fc1)

Also tried (EnterpriseServices), same version. 

Command either has been eliminated, or requires other config to be in place, it would seem.