05-25-2011 03:21 AM - edited 03-04-2019 12:31 PM
Hi,
I am praveen Kumar from Hyderabad.
we have upgraded the IOS(c7600s72033-adventerprisek9-mz.122-33.SRE3.bin) in 7609 router after reloading the router , one of the module (OSM-4OC3-POS-SI+) went in power down state.
Please let me know is there any IOS compatability issue for this module.
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL083221BY
2 4 4-port OC-3c POS SI+ OSM-4OC3-POS-SI+ JAB083605PL
3 0 4-subslot SPA Interface Processor-200 7600-SIP-200 JAE1309414Y
4 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAB092601GD
5 2 Supervisor Engine 720 (Active) WS-SUP720-3BXL SAD082602FM
6 8 CEF720 8 port 10GE with DFC WS-X6708-10GE SAL1431PCAD
7 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAB0924023L
8 0 4-subslot SPA Interface Processor-400 7600-SIP-400 JAE114520HP
9 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAL1206F8FN
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 0011.9370.2d38 to 0011.9370.2d67 2.0 12.2(14r)S5 12.2(33)SRE3 Ok
2 000f.24bb.fff0 to 000f.24bc.002f 1.0 Unknown Unknown PwrDown
3 0024.c490.8cc0 to 0024.c490.8cff 2.303 12.2(33)SRE3 12.2(33)SRE3 Ok
4 0014.6abd.1940 to 0014.6abd.197f 2.0 12.2(33)SRE3 12.2(33)SRE3 Ok
5 0011.21a0.dda0 to 0011.21a0.dda3 4.6 8.5(4) 12.2(33)SRE3 Ok
6 d0d0.fd42.bff0 to d0d0.fd42.bff7 2.2 12.2(18r)S1 12.2(33)SRE3 Ok
7 0014.692a.73f0 to 0014.692a.742f 2.0 12.2(33)SRE3 12.2(33)SRE3 Ok
8 001e.13bd.b980 to 001e.13bd.b9ff 2.5 12.2(33)SRE3 12.2(33)SRE3 Ok
9 001e.f783.8f34 to 001e.f783.8f4b 3.1 12.2(18r)S1 12.2(33)SRE3 Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 Centralized Forwarding Card WS-F6700-CFC SAL08290RFA 2.0 Ok
3/0 4xOC3 POS SPA SPA-4XOC3-POS JAE12492P8W 1.0 Ok
5 Policy Feature Card 3 WS-F6K-PFC3BXL SAD082605CT 1.10 Ok
5 MSFC3 Daughterboard WS-SUP720 SAD08250F8A 2.11 Ok
6 Distributed Forwarding Card WS-F6700-DFC3C SAL1431PCTZ 1.4 Ok
8/0 1xOC12 POS SPA SPA-1XOC12-POS JAE11474H6C 1.0 Ok
9 Centralized Forwarding Card WS-F6700-CFC SAL1206FD80 4.0 Ok
Mod Online Diag Status
---- -------------------
1 Pass
2 Not Applicable
3 Pass
3/0 Pass
4 Pass
5 Pass
6 Pass
7 Pass
8 Pass
8/0 Pass
9 Pass
Thanks and Regards,
Praveen Kumar Cherala
05-25-2011 10:35 AM
This module is not supported in any 12.2(33)SRE release:
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide