07-13-2012 06:51 AM - edited 03-04-2019 04:57 PM
hello
i had read the forum looking to get some answer about my problem
the thing is that the router was working perfect and
suddenly ATM 0 when down.....
my ISP provider came to my office and checked the line with modem and the modem work perfect
he told me that the ATM 0 is broke or something
i had tried the follow commands
dsl operating-mode ansi-dmt
show dsl interface
show controllers atm
this is my config
User Access Verification
Password:
INAVI>enable
Password:
Password:
INAVI#show run
Building configuration...
Current configuration : 1507 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname INAVI
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$n5Oz$rIs2sArvaC9WvwlmXIzuO.
!
no aaa new-model
!
!
dot11 syslog
no ip dhcp use vrf connected
!
ip dhcp pool CLIENT
import all
network 10.0.0.0 255.255.255.0
default-router 10.0.0.1
dns-server 196.3.81.5 196.3.81.132
domain-name codetel.net.do
lease 0 2
!
!
ip cef
!
!
!
!
!
archive
log config
hidekeys
!
!
!
!
!
interface ATM0
no ip address
no ip mroute-cache
atm vc-per-vp 64
no atm ilmi-keepalive
pvc 0/33
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
dsl operating-mode auto
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Vlan1
ip address 10.0.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
!
interface Dialer1
mtu 1488
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
ppp pap sent-username 8092201111 password 0 8092201111
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer1
!
ip http server
no ip http secure-server
ip nat inside source list 102 interface Dialer1 overload
!
access-list 102 permit ip any any
dialer-list 1 protocol ip permit
!
control-plane
!
!
line con 0
no modem enable
line aux 0
line vty 0 4
password fluke
logging synchronous
login
!
scheduler max-task-time 5000
end
thank you
07-13-2012 07:07 AM
Hi Julio,
It is indeed possible that your DSL interface has been somehow damaged, but let's hope it is not that bad.
I indeed suggest using the dsl operating-mode auto on your ATM0 interface. Furthermore, can you post the output of the show dsl interface and show controllers atm? They may contain vital informationi about the cause of your problem.
Best regards,
Peter
07-13-2012 07:12 AM
well as far i know i read that in show controllers atm
the atm is maybe damaged and i got a lot of numbes doing that
let me know if i need to post it or something
07-13-2012 07:14 AM
Julio,
Yes, please, post the output of both show controllers atm and show dsl interface. Thank you!
Best regards,
Peter
07-13-2012 07:27 AM
C1A 0x0000)
(0x68049C1C 0x0000) (0x68049C1E 0x0000) (0x68049C20 0x0000) (0x68049
C22 0x0000)
(0x68049C24 0x0000) (0x68049C26 0x0000) (0x68049C28 0x0000) (0x68049
C2A 0x0000)
(0x68049C2C 0x0000) (0x68049C2E 0x0000) (0x68049C30 0x0000) (0x68049
C32 0x0000)
(0x68049C34 0x0000) (0x68049C36 0x0000) (0x68049C38 0x0000) (0x68049
C3A 0x0000)
(0x68049C3C 0x0000) (0x68049C3E 0x0000) (0x68049C40 0x0000) (0x68049
C42 0x0000)
(0x68049C44 0x0000) (0x68049C46 0x8000)
<* Channel Parameters *>
Channel [TxBD Base . Tx Cur BD . Tx Conf BD] [RxBD Base . Rx Cur BD] RCT
TCT MRBLR
--------------------------------------------------------------------------------
--------------------
1 [0x03BDEB00 0x03BDEB00 0x03BDEB00] [0x03BDF100 0x03BDF100] 0x68049420
0x680495A0 0x00000000
<* Channel (01) TCT *>
TCT Status = 0x10040000, TxDBPtr = 0x7ED0FDBC, TBDCnt = 0x0000B95A, TBDOff
= 0x00000000
RateRem = 0x00000015, PCRFra = 0x00000015, PCR = 0x0000002E, AAL0 CR10
= 0x00000040
APCLC = 0x00000000, CellHdr = 0x00000000, TxBDBase misc = 0x00BDEB02
<* Channel (01) Tx BDs *>
# BD Status-Length Data Buffer
-----------------------------------------
0 0x03BDEB00 0x10000000 0x00000000
<* Channel (01) RCT *>
RCT Status = 0x10000000, RxDBPtr = 0xFFCF7F45, Time Stamp = 0x45B6367E, RBDOff
= 0x00000000
AAL Bits = 0x00000040, MRBLR = 0x00000000, RxBDBase = 0x00BDF100
<* Channel (01) Rx BDs *>
RxPoolCurrent = 0x00000000, RxPoolNext = 0x00000010
# BD Status Data Buffer [tBuffer . Particle . Size .
Rx Buffer]
---------------------------------------------------------------------------
-------------
0 0x03BDF100 0x90000000 0x03C857C0 [0x81CE0D24 0x00000000 0x00000000
0x00000000]
1 0x03BDF108 0x90000000 0x03C85900 [0x81CE0D50 0x00000000 0x00000000
0x00000000]
2 0x03BDF110 0x90000000 0x03C85A40 [0x81CE0D7C 0x00000000 0x00000000
0x00000000]
3 0x03BDF118 0x90000000 0x03C85B80 [0x81CE0DA8 0x00000000 0x00000000
0x00000000]
4 0x03BDF120 0x90000000 0x03C85CC0 [0x81CE0DD4 0x00000000 0x00000000
0x00000000]
5 0x03BDF128 0x90000000 0x03C85E00 [0x81CE0E00 0x00000000 0x00000000
0x00000000]
6 0x03BDF130 0x90000000 0x03C85F40 [0x81CE0E2C 0x00000000 0x00000000
0x00000000]
7 0x03BDF138 0x90000000 0x03C86080 [0x81CE0E58 0x00000000 0x00000000
0x00000000]
8 0x03BDF140 0x90000000 0x03C861C0 [0x81CE0E84 0x00000000 0x00000000
0x00000000]
9 0x03BDF148 0x90000000 0x03C86300 [0x81CE0EB0 0x00000000 0x00000000
0x00000000]
10 0x03BDF150 0x90000000 0x03C86440 [0x81CE0EDC 0x00000000 0x00000000
0x00000000]
11 0x03BDF158 0x90000000 0x03C86580 [0x81CE0F08 0x00000000 0x00000000
0x00000000]
12 0x03BDF160 0x90000000 0x03C866C0 [0x81CE0F34 0x00000000 0x00000000
0x00000000]
13 0x03BDF168 0x90000000 0x03C86800 [0x81CE0F60 0x00000000 0x00000000
0x00000000]
14 0x03BDF170 0x90000000 0x03C86940 [0x81CE0F8C 0x00000000 0x00000000
0x00000000]
15 0x03BDF178 0xB0000000 0x03C86A80 [0x81CE0FB8 0x00000000 0x00000000
0x00000000]
VC QoS Summary
--------------
Active Configured Scheduled
Connections
VCD VPI VCI COS PCR SCR/MCR COS PCR SCR/MCR
--- -------- -------- ------ ------- -------- ------- --------
Connections RX RX RX RX TX TX TX
VCD VPI/ VCI AAL5 RAW Chain Drop AAL5 RAW Drop
--- --- ----- ----- ----- ----- ----- ----- ----- -----
Oam pak statistics:
Oam paks waiting for tx for each vcd(vcd/count/drop)
1/0/0 2/0/0 3/0/0 4/0/0 5/0/0 6/0/0 7/0/0 8/0/0
9/0/0 10/0/0
Misc Oam Drops: 0
INAVI#$
INAVI#
INAVI#
INAVI#show log
Syslog logging: enabled (0 messages dropped, 2 messages rate-limited,
0 flushes, 0 overruns, xml disabled, filtering disabled)
Console logging: level debugging, 22 messages logged, xml disabled,
filtering disabled
Monitor logging: level debugging, 0 messages logged, xml disabled,
filtering disabled
Buffer logging: disabled, xml disabled,
filtering disabled
Logging Exception size (4096 bytes)
Count and timestamp logging messages: disabled
No active filter modules.
Trap logging: level informational, 24 message lines logged
INAVI#show log
Syslog logging: enabled (0 messages dropped, 2 messages rate-limited,
0 flushes, 0 overruns, xml disabled, filtering disabled)
Console logging: level debugging, 22 messages logged, xml disabled,
filtering disabled
Monitor logging: level debugging, 0 messages logged, xml disabled,
filtering disabled
Buffer logging: disabled, xml disabled,
filtering disabled
Logging Exception size (4096 bytes)
Count and timestamp logging messages: disabled
No active filter modules.
Trap logging: level informational, 24 message lines logged
INAVI#deb
INAVI#debug a
INAVI#debug at
INAVI#debug atm e
INAVI#debug atm err
INAVI#debug atm errors
ATM errors debugging is on
INAVI#
*Jul 6 03:09:52.543: DSL(ATM0): Could not establish connection event=1
*Jul 6 03:11:15.223: DSL(ATM0): Could not establish connection event=1
INAVI con0 is now available
Press RETURN to get started.
*Jul 6 03:40:00.623: DSL(ATM0): Could not establish connection event=1
*Jul 6 03:41:23.287: DSL(ATM0): Could not establish connection event=1
*Jul 6 03:42:45.951: DSL(ATM0): Could not establish connection event=1
*Jul 6 03:44:08.631: DSL(ATM0): Could not establish connection event=1
*Jul 6 03:45:31.295: DSL(ATM0): Could not establish connection event=1
*Jul 6 03:46:53.959: DSL(ATM0): Could not establish connection event=1
*Jul 6 03:48:16.627: DSL(ATM0): Could not establish connection event=1
*Jul 6 03:49:39.291: DSL(ATM0): Could not establish connection event=1
INAVI>
INAVI>
INAVI>
*Jul 6 03:51:01.955: DSL(ATM0): Could not establish connection event=1
*Jul 6 03:53:18.023: DSL(ATM0): Could not establish connection event=1
*Jul 6 03:54:40.695: DSL(ATM0): Could not establish connection event=1
*Jul 6 03:56:03.367: DSL(ATM0): Could not establish connection event=1
*Jul 6 03:57:26.047: DSL(ATM0): Could not establish connection event=1
*Jul 6 03:58:48.723: DSL(ATM0): Could not establish connection event=1
INAVI con0 is now available
Press RETURN to get started.
*Jul 6 04:01:31.811: DSL(ATM0): Could not establish connection event=1
INAVI>
INAVI>
INAVI>
INAVI>enable
Password:
INAVI#show con
INAVI#show contr
INAVI#show controllers a
INAVI#show controllers aTM 0
Interface: ATM0, Hardware: MPC ATMSAR (with Alcatel ADSL Module), State: down
IDB: 0x81BDB4C0 Instance: 0x81BDCD18 PHY Inst: 0x81BE0AA8 us_bwidth: 4608
Slot: 0 Unit: 0 pkt Size: 4528
Sar ctrl queue: max depth = 0, current queue depth = 0,
drops = 0, urun cnt = 0, total cnt = 0
<* ATM Parameter RAM *>
RCELL_TMP_BASE = 0x000008C0, TCELL_TMP_BASE = 0x00000900, UDC_TMP_BASE = 0x00000
000, INT_RCT_BASE = 0x00009400
INT_TCT_BASE = 0x00009580, INT_TCTE_BASE = 0x00009700, APCP_BASE = 0x00000
940, INTT_BASE = 0x00009880
BD_BASE_EXT = 0x03000000, VPT_BASE = 0x680498C0, VCT_BASE = 0x03BDF
F00, VP_MASK = 0x0000003F
CRC32_PRES = 0xFFFFFFFF, CRC32_MASK = 0xDEBB20E3, IDLE_BASE = 0x00009
9C0, IDLE_SIZE = 0x00000034
VCIF = 0x00000000, GMODE = 0x00000009, COMM_INFO(0x86) = 0x00000000
, COMM_INFO(0x88) = 0x00010000
<* APC Parameters *>
APCL_FIRST = 0x00000960, APCL_LAST = 0x00000968, APCL_PTR = 0x00000960
CPS = 0x00000001, CPS_CNT = 0x00000001, MAX_IT = 0x00000001
REAL_TSTP = 0x00000004, APC_STATE = 0x00000000
<* APC Pri & Schedule Tables *>
Level 1 : Base = 0x00009A00, End = 0x00009B20, Rptr = 0x00009A08, Sptr = 0x00
009A06
(0x68049A00 0x0000) (0x68049A02 0x0000) (0x68049A04 0x0000) (0x68049
A06 0x0000)
(0x68049A08 0x0000) (0x68049A0A 0x0000) (0x68049A0C 0x0000) (0x68049
A0E 0x0000)
(0x68049A10 0x0000) (0x68049A12 0x0000) (0x68049A14 0x0000) (0x68049
A16 0x0000)
(0x68049A18 0x0000) (0x68049A1A 0x0000) (0x68049A1C 0x0000) (0x68049
A1E 0x0000)
(0x68049A20 0x0000) (0x68049A22 0x0000) (0x68049A24 0x0000) (0x68049
A26 0x0000)
(0x68049A28 0x0000) (0x68049A2A 0x0000) (0x68049A2C 0x0000) (0x68049
A2E 0x0000)
(0x68049A30 0x0000) (0x68049A32 0x0000) (0x68049A34 0x0000) (0x68049
A36 0x0000)
(0x68049A38 0x0000) (0x68049A3A 0x0000) (0x68049A3C 0x0000) (0x68049
A3E 0x0000)
(0x68049A40 0x0000) (0x68049A42 0x0000) (0x68049A44 0x0000) (0x68049
A46 0x0000)
(0x68049A48 0x0000) (0x68049A4A 0x0000) (0x68049A4C 0x0000) (0x68049
A4E 0x0000)
(0x68049A50 0x0000) (0x68049A52 0x0000) (0x68049A54 0x0000) (0x68049
A56 0x0000)
(0x68049A58 0x0000) (0x68049A5A 0x0000) (0x68049A5C 0x0000) (0x68049
A5E 0x0001)
(0x68049A60 0x0000) (0x68049A62 0x0000) (0x68049A64 0x0000) (0x68049
A66 0x0000)
(0x68049A68 0x0000) (0x68049A6A 0x0000) (0x68049A6C 0x0000) (0x68049
A6E 0x0000)
(0x68049A70 0x0000) (0x68049A72 0x0000) (0x68049A74 0x0000) (0x68049
A76 0x0000)
(0x68049A78 0x0000) (0x68049A7A 0x0000) (0x68049A7C 0x0000) (0x68049
A7E 0x0000)
(0x68049A80 0x0000) (0x68049A82 0x0000) (0x68049A84 0x0000) (0x68049
A86 0x0000)
(0x68049A88 0x0000) (0x68049A8A 0x0000) (0x68049A8C 0x0000) (0x68049
A8E 0x0000)
(0x68049A90 0x0000) (0x68049A92 0x0000) (0x68049A94 0x0000) (0x68049
A96 0x0000)
(0x68049A98 0x0000) (0x68049A9A 0x0000) (0x68049A9C 0x0000) (0x68049
A9E 0x0000)
(0x68049AA0 0x0000) (0x68049AA2 0x0000) (0x68049AA4 0x0000) (0x68049
AA6 0x0000)
(0x68049AA8 0x0000) (0x68049AAA 0x0000) (0x68049AAC 0x0000) (0x68049
AAE 0x0000)
(0x68049AB0 0x0000) (0x68049AB2 0x0000) (0x68049AB4 0x0000) (0x68049
AB6 0x0000)
(0x68049AB8 0x0000) (0x68049ABA 0x0000) (0x68049ABC 0x0000) (0x68049
ABE 0x0000)
(0x68049AC0 0x0000) (0x68049AC2 0x0000) (0x68049AC4 0x0000) (0x68049
AC6 0x0000)
(0x68049AC8 0x0000) (0x68049ACA 0x0000) (0x68049ACC 0x0000) (0x68049
ACE 0x0000)
(0x68049AD0 0x0000) (0x68049AD2 0x0000) (0x68049AD4 0x0000) (0x68049
AD6 0x0000)
(0x68049AD8 0x0000) (0x68049ADA 0x0000) (0x68049ADC 0x0000) (0x68049
ADE 0x0000)
(0x68049AE0 0x0000) (0x68049AE2 0x0000) (0x68049AE4 0x0000) (0x68049
AE6 0x0000)
(0x68049AE8 0x0000) (0x68049AEA 0x0000) (0x68049AEC 0x0000) (0x68049
AEE 0x0000)
(0x68049AF0 0x0000) (0x68049AF2 0x0000) (0x68049AF4 0x0000) (0x68049
AF6 0x0000)
(0x68049AF8 0x0000) (0x68049AFA 0x0000) (0x68049AFC 0x0000) (0x68049
AFE 0x0000)
(0x68049B00 0x0000) (0x68049B02 0x0000) (0x68049B04 0x0000) (0x68049
B06 0x0000)
(0x68049B08 0x0000) (0x68049B0A 0x0000) (0x68049B0C 0x0000) (0x68049
B0E 0x0000)
(0x68049B10 0x0000) (0x68049B12 0x0000) (0x68049B14 0x0000) (0x68049
B16 0x0000)
(0x68049B18 0x0000) (0x68049B1A 0x0000) (0x68049B1C 0x0000) (0x68049
B1E 0x0000)
(0x68049B20 0x0000) (0x68049B22 0x8000)
Level 2 : Base = 0x00009B24, End = 0x00009C44, Rptr = 0x00009B2C, Sptr = 0x00
009B2A
(0x68049B24 0x0000) (0x68049B26 0x0000) (0x68049B28 0x0000) (0x68049
B2A 0x0000)
(0x68049B2C 0x0000) (0x68049B2E 0x0000) (0x68049B30 0x0000) (0x68049
B32 0x0000)
(0x68049B34 0x0000) (0x68049B36 0x0000) (0x68049B38 0x0000) (0x68049
B3A 0x0000)
(0x68049B3C 0x0000) (0x68049B3E 0x0000) (0x68049B40 0x0000) (0x68049
B42 0x0000)
(0x68049B44 0x0000) (0x68049B46 0x0000) (0x68049B48 0x0000) (0x68049
B4A 0x0000)
(0x68049B4C 0x0000) (0x68049B4E 0x0000) (0x68049B50 0x0000) (0x68049
B52 0x0000)
(0x68049B54 0x0000) (0x68049B56 0x0000) (0x68049B58 0x0000) (0x68049
B5A 0x0000)
(0x68049B5C 0x0000) (0x68049B5E 0x0000) (0x68049B60 0x0000) (0x68049
B62 0x0000)
(0x68049B64 0x0000) (0x68049B66 0x0000) (0x68049B68 0x0000) (0x68049
B6A 0x0000)
(0x68049B6C 0x0000) (0x68049B6E 0x0000) (0x68049B70 0x0000) (0x68049
B72 0x0000)
(0x68049B74 0x0000) (0x68049B76 0x0000) (0x68049B78 0x0000) (0x68049
B7A 0x0000)
(0x68049B7C 0x0000) (0x68049B7E 0x0000) (0x68049B80 0x0000) (0x68049
B82 0x0000)
(0x68049B84 0x0000) (0x68049B86 0x0000) (0x68049B88 0x0000) (0x68049
B8A 0x0000)
(0x68049B8C 0x0000) (0x68049B8E 0x0000) (0x68049B90 0x0000) (0x68049
B92 0x0000)
(0x68049B94 0x0000) (0x68049B96 0x0000) (0x68049B98 0x0000) (0x68049
B9A 0x0000)
(0x68049B9C 0x0000) (0x68049B9E 0x0000) (0x68049BA0 0x0000) (0x68049
BA2 0x0000)
(0x68049BA4 0x0000) (0x68049BA6 0x0000) (0x68049BA8 0x0000) (0x68049
BAA 0x0000)
(0x68049BAC 0x0000) (0x68049BAE 0x0000) (0x68049BB0 0x0000) (0x68049
BB2 0x0000)
(0x68049BB4 0x0000) (0x68049BB6 0x0000) (0x68049BB8 0x0000) (0x68049
BBA 0x0000)
(0x68049BBC 0x0000) (0x68049BBE 0x0000) (0x68049BC0 0x0000) (0x68049
BC2 0x0000)
(0x68049BC4 0x0000) (0x68049BC6 0x0000) (0x68049BC8 0x0000) (0x68049
BCA 0x0000)
(0x68049BCC 0x0000) (0x68049BCE 0x0000) (0x68049BD0 0x0000) (0x68049
BD2 0x0000)
(0x68049BD4 0x0000) (0x68049BD6 0x0000) (0x68049BD8 0x0000) (0x68049
BDA 0x0000)
(0x68049BDC 0x0000) (0x68049BDE 0x0000) (0x68049BE0 0x0000) (0x68049
BE2 0x0000)
(0x68049BE4 0x0000) (0x68049BE6 0x0000) (0x68049BE8 0x0000) (0x68049
BEA 0x0000)
(0x68049BEC 0x0000) (0x68049BEE 0x0000) (0x68049BF0 0x0000) (0x68049
BF2 0x0000)
(0x68049BF4 0x0000) (0x68049BF6 0x0000) (0x68049BF8 0x0000) (0x68049
BFA 0x0000)
(0x68049BFC 0x0000) (0x68049BFE 0x0000) (0x68049C00 0x0000) (0x68049
C02 0x0000)
(0x68049C04 0x0000) (0x68049C06 0x0000) (0x68049C08 0x0000) (0x68049
C0A 0x0000)
(0x68049C0C 0x0000) (0x68049C0E 0x0000) (0x68049C10 0x0000) (0x68049
C12 0x0000)
(0x68049C14 0x0000) (0x68049C16 0x0000) (0x68049C18 0x0000) (0x68049
C1A 0x0000)
(0x68049C1C 0x0000) (0x68049C1E 0x0000) (0x68049C20 0x0000) (0x68049
C22 0x0000)
(0x68049C24 0x0000) (0x68049C26 0x0000) (0x68049C28 0x0000) (0x68049
C2A 0x0000)
(0x68049C2C 0x0000) (0x68049C2E 0x0000) (0x68049C30 0x0000) (0x68049
C32 0x0000)
(0x68049C34 0x0000) (0x68049C36 0x0000) (0x68049C38 0x0000) (0x68049
C3A 0x0000)
(0x68049C3C 0x0000) (0x68049C3E 0x0000) (0x68049C40 0x0000) (0x68049
C42 0x0000)
(0x68049C44 0x0000) (0x68049C46 0x8000)
<* Channel Parameters *>
Channel [TxBD Base . Tx Cur BD . Tx Conf BD] [RxBD Base . Rx Cur BD] RCT
TCT MRBLR
--------------------------------------------------------------------------------
--------------------
1 [0x03BDEB00 0x03BDEB00 0x03BDEB00] [0x03BDF100 0x03BDF100] 0x68049420
0x680495A0 0x00000000
<* Channel (01) TCT *>
TCT Status = 0x10040000, TxDBPtr = 0x7ED0FDBC, TBDCnt = 0x0000B95A, TBDOff
= 0x00000000
RateRem = 0x00000015, PCRFra = 0x00000015, PCR = 0x0000002E, AAL0 CR10
= 0x00000040
APCLC = 0x00000000, CellHdr = 0x00000000, TxBDBase misc = 0x00BDEB02
<* Channel (01) Tx BDs *>
# BD Status-Length Data Buffer
-----------------------------------------
0 0x03BDEB00 0x10000000 0x00000000
<* Channel (01) RCT *>
RCT Status = 0x10000000, RxDBPtr = 0xFFCF7F45, Time Stamp = 0x45B6367E, RBDOff
= 0x00000000
AAL Bits = 0x00000040, MRBLR = 0x00000000, RxBDBase = 0x00BDF100
<* Channel (01) Rx BDs *>
RxPoolCurrent = 0x00000000, RxPoolNext = 0x00000010
# BD Status Data Buffer [tBuffer . Particle . Size .
Rx Buffer]
---------------------------------------------------------------------------
-------------
0 0x03BDF100 0x90000000 0x03C857C0 [0x81CE0D24 0x00000000 0x00000000
0x00000000]
1 0x03BDF108 0x90000000 0x03C85900 [0x81CE0D50 0x00000000 0x00000000
0x00000000]
2 0x03BDF110 0x90000000 0x03C85A40 [0x81CE0D7C 0x00000000 0x00000000
0x00000000]
3 0x03BDF118 0x90000000 0x03C85B80 [0x81CE0DA8 0x00000000 0x00000000
0x00000000]
4 0x03BDF120 0x90000000 0x03C85CC0 [0x81CE0DD4 0x00000000 0x00000000
0x00000000]
5 0x03BDF128 0x90000000 0x03C85E00 [0x81CE0E00 0x00000000 0x00000000
0x00000000]
6 0x03BDF130 0x90000000 0x03C85F40 [0x81CE0E2C 0x00000000 0x00000000
0x00000000]
7 0x03BDF138 0x90000000 0x03C86080 [0x81CE0E58 0x00000000 0x00000000
0x00000000]
8 0x03BDF140 0x90000000 0x03C861C0 [0x81CE0E84 0x00000000 0x00000000
0x00000000]
9 0x03BDF148 0x90000000 0x03C86300 [0x81CE0EB0 0x00000000 0x00000000
0x00000000]
10 0x03BDF150 0x90000000 0x03C86440 [0x81CE0EDC 0x00000000 0x00000000
0x00000000]
11 0x03BDF158 0x90000000 0x03C86580 [0x81CE0F08 0x00000000 0x00000000
0x00000000]
12 0x03BDF160 0x90000000 0x03C866C0 [0x81CE0F34 0x00000000 0x00000000
0x00000000]
13 0x03BDF168 0x90000000 0x03C86800 [0x81CE0F60 0x00000000 0x00000000
0x00000000]
14 0x03BDF170 0x90000000 0x03C86940 [0x81CE0F8C 0x00000000 0x00000000
0x00000000]
15 0x03BDF178 0xB0000000 0x03C86A80 [0x81CE0FB8 0x00000000 0x00000000
0x00000000]
VC QoS Summary
--------------
Active Configured Scheduled
Connections
VCD VPI VCI COS PCR SCR/MCR COS PCR SCR/MCR
--- -------- -------- ------ ------- -------- ------- --------
Connections RX RX RX RX TX TX TX
VCD VPI/ VCI AAL5 RAW Chain Drop AAL5 RAW Drop
--- --- ----- ----- ----- ----- ----- ----- ----- -----
Oam pak statistics:
Oam paks waiting for tx for each vcd(vcd/count/drop)
1/0/0 2/0/0 3/0/0 4/0/0 5/0/0 6/0/0 7/0/0 8/0/0
9/0/0 10/0/0
Misc Oam Drops: 0
INAVI#$
07-13-2012 07:59 AM
Julio,
Thank you. The show dsl interface output is missing yet. Can you post that as well?
Best regards,
Peter
07-13-2012 08:24 AM
INAVI#show dsl interface atM 0
Alcatel 20196 chipset information
Line has not yet been activated. No information available.
DSL: Training log buffer capability is not enabled
INAVI#
07-13-2012 02:00 PM
Hello Julio,
Please add the following command to the interface ATM0:
dsl enable-training-log
I then suggest deactivating the ATM0 interface using the shutdown command, waiting a minute or so, then reactivating it using the no shutdown command, waiting again a minute or two and then repeating the show dsl interface command. Please post its output here. Thank you!
Best regards,
Peter
07-14-2012 04:52 AM
If you have seen with your eyes another modem working, there are two possible explainations:
07-16-2012 05:45 AM
INAVI#show interfaces atM 0
ATM0 is down, line protocol is down
Hardware is MPC ATMSAR (with Alcatel ADSL Module)
MTU 4470 bytes, sub MTU 4470, BW 4608 Kbit, DLY 80 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ATM, loopback not set
Encapsulation(s): AAL5 AAL2, PVC mode
10 maximum active VCs, 64 VCs per VP, 0 current VCCs
VC Auto Creation Disabled.
VC idle disconnect time: 300 seconds
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: Per VC Queueing
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 2 interface resets
0 output buffer failures, 0 output buffers swapped out
07-16-2012 02:45 PM
Hi Julio,
Have you been able to enter the dsl enable-training-log on the ATM0 interface and try to capture the log as I suggested in my previous response?
Best regards,
Peter
07-20-2012 09:11 AM
hello peter
i dotn know what is going on but here in my company we have 4 routers and now 3 fo them have the same problem as the one i posted before
i upgraded the firmware on one of the routers and didnt work....stillt he same
07-20-2012 10:02 AM
Hi Julio,
Have your ISP come to your premises once again and demand that
This is probably going to be a fight between the ISP and you but don't let them shake you off that easily.
Keep me informed.
Best regards,
Peter
P.S.: I have asked you twice for the dsl enable-training-log command and the related show dsl interface atm0 output - you have not provided it yet. Would you be so kind to do it?
07-21-2012 05:03 PM
Can you please check replacing
pvc 0/33
encapsulation aal5mux ppp dialer
With
pvc 0/33
encapsulation aal5snap ..........
Sent from Cisco Technical Support iPhone App
07-21-2012 11:38 PM
Ali Kmboh wrote:
Can you please check replacing
pvc 0/33
encapsulation aal5mux ppp dialer
With
pvc 0/33
encapsulation aal5snap ..........
Sent from Cisco Technical Support iPhone App
Doing these changes will never bring up an interface.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide